Quantcast

Active Optics

Active Optics — Active optics is a relatively new technology for astronomic telescopes.

Most modern telescopes are reflectors, with the primary element being a very large mirror. Historically, a fixed weight-to-diameter relation was used to build these mirrors, limiting their maximum diameter to 5 or 6 meters (200 or 230 inches), like in the Palomar Observatory.

A new generation of telescopes uses instead very thin mirrors, uncapable of sustaining themselves. Instead, an array of actuators behind the mirror keeps it in an optimal shape.

The combination of actuators, a quality-of-image detector, and a real-time computer program to move the actuators to obtain the best possible image is termed active optics.

The “activeness” in their name means that the system keeps the primary mirror in its optimal shape against all environmental factors such as gravity (at different telescope inclinations), wind, telescope axis deformation, etc. Active optics correct all factors that may affect image quality at timescales of one second or more.

Factors that affect the image at faster timescales (1/100th seconds or even less) are usually caused by the atmosphere and are not easily corrected with primary mirrors. For those, a similar technology has been developed for use with small corrective mirrors and recently for secondary mirrors (see Adaptive optics).

—–

Click here to learn more on this topic from eLibrary:

Active Optics


comments powered by Disqus