• E-mail
• Print
• Comment
• Font Size
• Digg
• del.icio.us
• Discuss article

Xiom Introduces Revolutionary Marine Protective Coating: Slashes Maintenance Costs and Fuel Consumption

Posted on: Thursday, 18 October 2007, 12:00 CDT

Xiom Corp. (OTCBB: XMCP), a Long Island, NY-based company that manufactures polymer powder spray systems, polymer coatings, and polymer/ceramic one-step coatings, for onsite application has developed a high performance, environmentally safe, self-cleaning, marine vessel hull protective coating. Xiom's "stay-clean" coating for both steel and fiberglass boat bottoms significantly reduces maintenance costs and fuel consumption caused by marine growth. The inexpensive and easy-to-apply polymer/ceramic-based coating contains no TBT (tributyl tin) or VOCs (volatile organic chemicals), and does not ablate or wear away.

Xiom Corp's new ship and boat bottom protective coating is a patent-pending powder coating. The unique coating has a network of evenly dispersed active copper oxide and silver ions in a polymer matrix that is fully melted when applied with Xiom's proprietary thermal spray process. The polymer matrix serves to hold the copper oxide in place for years. Even if there should be some break or "tear" in the coating, there is a nylon modified fuse bond epoxy between the hull and coating, maintaining integrity. With paints that contain copper oxide, the copper particles closest to the surface quickly ablate, leaving a space so that water gets leverage on the surface of the paint. This accelerates ablation is accelerated, limiting coating life. With Xiom's coating, the active ingredients are always strongly held and available in the coating, and the coating ablates at less than 1/10 the ablation rate of paints, while providing superior protection.

Xiom's boat and ship bottom protective coating has micro channels in the surface. These micro- channels serve to increase the effective surface area of exposed copper. Visualize microscopic plastic fists with the fingers tightly holding the copper oxide. Water swirls around the fist and between the fingers, touching copper at many points, but the fist never releases its grip on the copper. According to Andrew Mazzone, president of Xiom Corp., "Copper has been used to protect boat coatings for centuries. The secret was to develop a matrix that would hold the copper and silver oxides in place without them quickly wearing away. Testing at world famous Florida Institute of Technology confirms our results."

Xiom's ship and boat bottom protective coating will reduce the expense involved in maintaining and operating boats and ships. The coating will last five times longer than paints: Season after season will pass without the need for scraping or repainting the hull. The coating will minimize fuel costs as it eliminates the surface resistance caused by marine organisms building up on the hulls of marine vessels.

About Xiom Corp.

Xiom Corporation of West Babylon, New York, manufactures onsite powder coating spray equipment, and polymer and polymer/ceramic one-step spray materials in its Long Island facility. Further announcements pertaining to major domestic and international joint ventures and projects will be announced in upcoming news releases. For further information about Xiom Corp. visit our website at www.xiom-corp.com.

Safe harbor under the Private Securities Litigation Reform Act of 1995: The statements which are not historical facts contained in this press release are forward-looking statements that involve certain risks and uncertainties including but not limited to risks associated with the uncertainty of future financial results, regulatory approval processes, the impact of competitive products or pricing, technological changes, the effect of economic conditions and other uncertainties as may be detailed in the Company's filings with the Securities and Exchange Commission. Nothing in this press release shall be construed as an offer to buy or sell any securities herein.

Source: Business Wire

More News in this Category