Quantcast
Last updated on April 16, 2014 at 17:34 EDT

Reduce CO2 Emissions, Increase Electric Vehicle Range with Saflex® S Series Advanced Solar Interlayer

September 28, 2011

ST. LOUIS, Sept. 28, 2011 /PRNewswire/ — Solutia Inc. (NYSE: SOA) the world’s leading producer of polyvinyl butyral (PVB) interlayers for laminated glass, today announced the commercial availability of its new Saflex® S Series Interlayer for automotive applications. In addition to providing traditional safety benefits of automotive laminated glazing, Saflex S series absorbs solar heat transmitted through the vehicle’s glazing, which reduces air conditioning usage and improves vehicle fuel economy and CO2 emissions. Saflex S series solar absorbing interlayer is also available in an acoustic formulation as offered in the Saflex Q series product, which was introduced in 2006. The new product development is part of Solutia’s emphasis to drive growth through innovative technologies and new products to meet market needs.

(Logo: http://photos.prnewswire.com/prnh/20081029/AQW096LOGO)

“Consumer demand for greener, more fuel-efficient vehicles is growing,” said Tom Selm, global business management director of Solutia’s Advanced Interlayers division. “However, consumer anxiety in regard to the range of pure electric vehicles and the lack of available infrastructure to charge vehicles in emergency situations is of continual concern.” Simulations and analysis conducted by the National Renewable Energy Laboratory (NREL) show that air conditioning use on a pure electric vehicle can reduce its driving range by 15-40 percent, depending on how often the air conditioning is used and the air conditioning unit size. NREL studies have shown that an advanced solar glazing solution, similar to Saflex S series, in the windscreen position can reduce cabin temperatures by 2 degrees to 3 degrees C, which when taking into account the potential reduced air conditioning usage, can translate into improved vehicle range when compared to a standard windscreen.

“Saflex S series advanced solar technology absorbs infrared radiation,” said John Derrico, global product technology lead for Solutia’s Advanced Interlayers division. “Absorbing solutions are ‘signal enabling’ and are compatible with wireless devices like cell phones, GPS units and electronic toll sensors.”

Saflex S series solar absorbing interlayer is a drop-in windscreen solution that can also provide improved cabin comfort, fuel efficiency and CO2 emission reductions on current and new internal combustion vehicle models. Additionally, Saflex S series has completed two years of rigorous natural Arizona and Florida exposure testing, as well as five years of accelerated exposure testing to assure automotive manufacturers of the stability and weathering performance of the new product.

Additional extensions are currently in development, including combining solar absorption technology with colors for sun roof, back lites and side laminate applications. For additional product information, including product brochures, technical data product offering and samples, please visit: www.saflex.com/solar .

Notes to Editor: SOLUTIA and Radiance Logo(TM) and all other trademarks listed below are trademarks of Solutia Inc. and/or its affiliates.

Forward Looking Statements

This press release may contain forward-looking statements, which can be identified by the use of words such as “believes,” “expects,” “may,” “will,” “intends,” “plans,” “estimates” or “anticipates,” or other comparable terminology, or by discussions of strategy, plans or intentions. These statements are based on management’s current expectations and assumptions about the industries in which Solutia operates. Forward-looking statements are not guarantees of future performance and are subject to significant risks and uncertainties that may cause actual results or achievements to be materially different from the future results or achievements expressed or implied by the forward-looking statements. These risks and uncertainties include, but are not limited to, those risk and uncertainties described in Solutia’s most recent Annual Report on Form 10-K, including under “Cautionary Statement About Forward Looking Statements” and “Risk Factors”, and Solutia’s quarterly reports on Form 10-Q. These reports can be accessed through the “Investors” section of Solutia’s website at www.solutia.com . Solutia disclaims any intent or obligation to update or revise any forward-looking statements in response to new information, unforeseen events, changed circumstances or any other occurrence.

Corporate Profile

Solutia is a market-leading performance materials and specialty chemicals company. The company focuses on providing solutions for a better life through a range of products, including: Saflex® polyvinyl butyral interlayers for glass lamination and for photovoltaic module encapsulation and VISTASOLAR® ethylene vinyl acetate films for photovoltaic module encapsulation; LLumar®, Vista(TM), EnerLogic(TM), FormulaOne®, Gila®, V-KOOL®, Huper Optik®, IQue(TM), Sun-X(TM) and Nanolux(TM) aftermarket performance films for automotive and architectural applications; Flexvue(TM) advanced film component solutions for solar and electronic technologies; and technical specialties products including Crystex® insoluble sulfur, Santoflex® PPD antidegradants, Therminol® heat transfer fluids and Skydrol® aviation hydraulic fluids. Solutia’s businesses are world leaders in each of their market segments. With its headquarters in St. Louis, Missouri, USA, the company operates globally with approximately 3,300 employees in more than 50 worldwide locations. More information is available at www.Solutia.com .

SOURCE Solutia Inc.


Source: PR Newswire