Quantcast
Last updated on April 20, 2014 at 21:20 EDT

Kimber intercepts 14 metres of 4.5 g/t gold plus 112 g/t silver and 4.5 metres of 12.7 g/t gold at the Carmen gold-silver deposit, Monterde project

September 28, 2011

VANCOUVER, Sept. 28, 2011 /PRNewswire/ – Kimber Resources Inc. (NYSE Amex:KBX,
TSX:KBR) is pleased to announce the results of seven drill holes in
Monterde, Mexico. The holes were drilled with the objective of
expanding and upgrading mineral resources potentially amenable to
underground extraction (“Carmen Deep” target).

“This Carmen Deep drill program continues to show evidence of strong
gold-silver mineralization on various structures within the Carmen
deposit, with a significant number of high grade gold-silver intercepts
over mineable widths in this latest batch of drill results,” said
Gordon Cummings, President and CEO of Kimber Resources. “The Monterde
drill program has recently been further expanded, with three core rigs
on site, and further drilling is planned on the Carmen and Veta Minitas
deposits over the coming months.”

Highlights of recent assay results from the Carmen deposit are tabulated
below, while complete results for all seven complete holes are
attached:

     ___________________________________________________________________
    |          |       |From | To  |Intercept*|Gold |Silver|    Gold    |
    |Drill Hole|Section| (m) | (m) |   (m)    |(g/t)|(g/t) |equivalent**|
    |          |       |     |     |          |     |      |   (g/t)    |
    |__________|_______|_____|_____|__________|_____|______|____________|
    |MTC-123A  |   32  |365.3|368.2|       2.9|  5.6|  41.1|         6.3|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |including |       |365.3|366.7|       1.4| 10.5|  49.2|        11.3|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |395.0|405.1|      10.1|  2.0|  27.3|         2.5|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |402.5|404.0|       1.5|  9.2|  39.1|         9.9|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |424.9|426.2|       1.3|  4.9|   5.7|         4.9|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |MTRD-511  |   35  |190.0|202.0|      12.0|  1.8| 130.8|         4.0|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |including |       |196.0|198.0|       2.0|  4.5| 244.0|         8.5|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |210.0|224.0|      14.0|  4.5| 112.4|         6.4|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |including |       |210.0|212.0|       2.0| 10.5| 279.0|        15.2|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |including |       |218.0|220.0|       2.0| 13.3| 239.0|        17.2|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |366.7|371.2|       4.5| 12.7|   9.7|        12.9|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |including |       |366.7|368.2|       1.5| 36.8|  10.5|        37.0|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |377.2|383.0|       5.8|  6.4|  18.1|         6.7|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |including |       |380.2|381.7|       1.5| 20.0|  24.4|        20.4|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |MTRD-514  |   35  |547.4|549.2|       1.8| 7.10|  20.2|         7.4|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |MTRD-515  |   28  |166.0|168.0|       2.0|  2.9|  90.6|         4.4|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |337.5|339.0|       1.5|  6.1| 127.0|         8.2|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |MTRD-516  |       |118.0|144.0|      26.0|  0.5|  68.2|         1.6|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |including |       |118.0|122.0|       4.0|  1.6| 168.7|         4.4|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |160.0|162.0|       2.0|  2.7|  93.0|         4.3|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |172.0|174.0|       2.0|  1.7| 125.0|         3.7|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |239.2|241.0|       1.8|  3.2|  80.8|         4.5|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |411.8|419.3|       7.5|  1.6|  22.3|         1.9|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |including |       |412.9|413.8|       0.9|  5.5| 160.0|         8.1|
    |__________|_______|_____|_____|__________|_____|______|____________|
    |and       |       |431.6|433.7|       2.1|  3.6|  53.7|         4.5|
    |__________|_______|_____|_____|__________|_____|______|____________|

* True widths are expected to range between 65% and 85% of the intervals
reported on the table above.

**Gold equivalent grade assumes equivalence of 60 grams of silver to one
gram of gold.

Drill Hole Details

The MTRD holes were pre-collared with reverse circulation holes and
completed to depth with core drilling in order to allow the holes to
reach target depths more cost effectively and promptly.  Holes
MTC-123A, MTC-124 and MTC-126 were drilled from surface with core
drilling.

Drill hole MTRD-511 was collared on Section 35 and was designed to
intersect the Carmen structure above the high grade intersection in
previously reported hole MTRD-477 (which intersected 5.2 metres grading
51.9 g/t gold and 1076 g/t silver, as reported on May 26, 2011).
MTRD-511 intersected Carmen at the 1995 metre elevation level,
approximately 60 metres above MTRD-477. The hole returned 5.8 metres of
6.4 g/t gold and 18.1 g/t silver associated with manganese oxides,
patchy silica and quartz stockworks. A hanging wall splay to Carmen,
approximately 10 metres above the Carmen structure, returned 4.5 metres
grading 12.7 g/t gold and 9.7 g/t silver associated with the same style
of alteration as Carmen. Significant gold and silver values were
returned from the Hilos structure, which parallels Carmen in the
hanging wall, including 14 metres grading 4.5 g/t gold and 112.4 g/t
silver.

Drill hole MTRD-514 was collared on Section 35 and was designed to drill
test the Carmen structure around the 1,700 metre elevation level in an
area with no previous drilling. The intercept on Carmen returned 5.2
metres grading 1.0 g/t gold and negligible silver associated with
quartz-calcite veinlets and stockworks, the presence of which warrants
additional drilling in the area.

Drill hole MTRD-515 was collared on Section 28 and was designed to
intersect the Carmen structure 1,900 metre elevation level,
approximately 60 metres south of historic drill hole MTR-328 (18 metres
grading 1.9 g/t gold and 14.7 g/t silver, ending in mineralization).
The Carmen structure returned 4.0 metres grading 1.9 g/t gold and 6.3
g/t silver associated with iron oxides with minor patches of
silicification and weak propyllitic alteration.

Drill hole MTRD-516 was collared on Section 37 and was designed to drill
test the same stratigraphic horizon cut in previously released high
grade hole MTRD-477. The hole intersected the Carmen structure 45
metres north of MTRD-477 at the 1,935 metre level. Results from the
Carmen intersection were 2.15 metres grading 3.6 g/t gold and 53.7 g/t
silver. Gold and silver mineralization is associated with strong
silicification and sphalerite, galena and pyrite veins ranging from 5
to 20cm in width. A hanging wall splay to the Carmen structure returned
7.5 metres of 1.6 g/t gold and 22.3 g/t silver associated with
sphalerite and galena veinlets. An intersection on the Hilos structure
returned 6.35 metres grading 1.2 g/t gold and 39.4 g/t silver.

Drill hole MTC-126 was collared on Section 26 and was designed to drill
test the same stratigraphic horizon as intersected in the previously
reported high grade hole MTRD-476. MTC-126 intersected the Carmen
horizon at the 1,860 metre elevation level, 100 metres to the south of
MTRD-476. The hole returned 0.5 metres grading 6.0 g/t gold and 31.3
g/t silver, associated with sphalerite and galena mineralization
grading 2.56% zinc and 2.25% lead.

Drill hole MTC-123A was collared on Section 32 and was designed to drill
test the 1,750 metre elevation level to explore for the depth extension
of gold-bearing massive sulphides encountered in previous drilling.
Sampling from the projected extension of the Carmen structure did not
return any significant mineralization. It is planned to re-enter this
hole and extend it by 50 metres to ensure that the structure did not
steepen and pass beyond the bottom of MTC-123A. A hanging wall splay to
the Cob structure returned an intersection of 2.95 metres grading 5.6
g/t gold and 41.1 g/t silver.

Drill hole MTC-124 was collared on section 29 to test the 1750 metres
elevation, 100 metres below high-grade hole MTRD-476. The Carmen
structure was intercepted with low gold values.

Illustrations

A plan view of the location of the drill holes completed in 2011, with
MTC-123A, MTC-124, MTC-126, MTRD-511, MTRD-514, MTRD-515 and MTRD 516
highlighted, can be viewed via the following link:

Plan View of Carmen 2011 drill holes

About Kimber

Kimber owns mineral concessions covering in excess of 39,000 hectares in
the prospective Sierra Madre gold-silver belt, including the Monterde
property, where three gold-silver mineral resources have already been
defined. The most advanced of these, the Carmen deposit, has been
extensively drilled and has undergone detailed geologic modeling. The
completion of the Updated Preliminary Economic Assessment for Monterde
in 2011 represents a significant step forward for Kimber and is
expected to lead to further development and more advanced economic
studies at the Monterde deposits. The subsequent discovery of high
grade gold-silver mineralization below the mineral resources used in
the preliminary economic assessment adds a potentially significant new
dimension to the opportunities at Monterde.

Forward looking statements

Statements in this release may be viewed as forward-looking statements,
including statements regarding estimates of mineral resources at
Monterde, the preliminary assessment of the Monterde project, the
conversion of inferred mineral resources to measured and indicated
mineral resources, the conversion of mineral resources to mineral
reserves, life of mine estimates, the potential for gold and silver
mineral resources in the Carmen and Veta Minitas deposits and other
targets within the Monterde project, the implications of the results of
drill holes reported herein, the results of future exploration, the
economic potential of any such discoveries made, the further
development, expected results and future economic assessments of the
Monterde project. When used in this press release, the words “expect”,
“intend”, “hopes”, “should”, “believe”, “may”, “will”, “if”,
“anticipates”, “potential for”, “potentially”, “suggests” and similar
expressions are intended to identify forward-looking statements. Such
statements involve risks and uncertainties that could cause actual
results to differ materially from those projected. Such risks and
uncertainties include, among others, uncertainty of mineral reserve and
resource estimates, continuity of mineralization between drill holes,
risks relating to fluctuations in the price of gold, the inherently
hazardous nature of mining-related activities, potential effects on
Kimber’s operations of environmental regulations in the countries in
which it operates, risks due to legal proceedings, risks relating to
political and economic instability in certain countries in which it
operates, risks related to the use of inferred mineral resources in the
preliminary assessment, and uncertainty of being able to raise capital
on favourable terms or at all, as well as those risk factors discussed
under the headings “Cautionary Note Regarding Forward-Looking
Statements” and “Risk Factors” in Kimber’s latest Annual Report on Form
20-F as recently filed on SEDAR and EDGAR.  There are no assurances the
Company can fulfil such forward-looking statements and the Company
undertakes no obligation to update such statements, except as required
by law. Such forward-looking statements are only predictions; actual
events or results may differ materially as a result of risks facing the
Company, some of which are beyond the Company’s control.

Quality Assurance/Quality Control

The technical information in this news release has been prepared in
accordance with Canadian regulatory requirements set out in National
Instrument 43-101 and reviewed and approved by Mr. Petrus (Marius) Mare
P.Geo., Vice-President Exploration of the Company.  The exploration
activities at the Monterde project site are carried out under the
supervision of Mr. Mare, who is the designated Qualified Person under
National Instrument 43-101 for the Monterde project and is responsible
for quality control at Monterde and has verified the data being
disclosed. He has determined that the laboratory reports matched the
drill sample logs and that the quality control assays fall within
reasonable limits. QA/QC procedures incorporate blanks and duplicates
inserted at the drill and standards inserted after sample preparation.
Sample preparation was done by ALS Chemex at its Chihuahua laboratory. 
Pulps are analyzed by ALS Chemex at its laboratory in North Vancouver,
British Columbia, using 50 gram sub-samples, using fire assay with an
AA finish for gold and four-acid digestion and ICP finish for silver
from a 0.4 gram subsample. High grade gold or silver intervals are
re-assayed by fire assay with gravimetric finish.

Cautionary Note to U.S. Investors – The United States Securities and
Exchange Commission permits U.S. mining companies, in their filings
with the SEC, to disclose only those mineral deposits that a company
can economically and legally extract or produce.  Kimber Resources uses
certain terms on its website (and certain press releases), such as
“measured,” “indicated,” and “inferred,” “resources,” which the SEC
guidelines strictly prohibit U.S. companies from including in their
filings with the SEC.  U.S. Investors are urged to consider closely the
disclosure under the heading “Cautionary Note to U.S. Investors
Regarding Mineral Reserve and Resource Estimates” in our latest annual
report on Form 20-F which may be secured from us, or from the SEC’s
website at
http://www.sec.gov/edgar.shtml.

Complete table of Carmen drill results
To accompany Kimber News Release Dated September 28, 2011

     __________________________________________________________________________
    |   Drill |       |From | To  |Intercept*|Gold |Silver|   Gold   |         |
    |   Hole  |Section| (m) | (m) |   (m)    |(g/t)|(g/t) |equivalent|Structure|
    |         |       |     |     |          |     |      |  (g/t)   |         |
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |MTC-123A |   32  |273.6|278.8|       5.1|  0.3|  55.9|       1.2|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |329.6|331.6|       2.0|  1.8|   5.4|       1.8|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |330.6|331.6|       1.0|  2.7|   6.5|       2.8|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |365.3|368.2|       2.9|  5.6|  41.1|       6.3|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |365.3|366.7|       1.4| 10.5|  49.2|      11.3|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |395.0|405.1|      10.1|  2.0|  27.3|       2.5|      Cob|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |395.0|396.5|       1.5|  2.4|  36.1|       3.0|      Cob|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |402.5|404.0|       1.5|  9.2|  39.1|       9.9|      Cob|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |424.9|426.2|       1.3|  4.9|   5.7|       4.9|   Cob FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |MTC-124  |   29  |155.3|158.2|       2.9|  0.3|  48.6|       1.1|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |338.6|342.9|       4.3|  0.2|  38.8|       0.8|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |350.4|354.5|       4.1|  0.6|   3.6|       0.7|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |MTC-126  |   26  | 68.3| 77.8|       9.6|  0.4|  61.2|       1.4|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       | 72.6| 74.3|       1.7|  1.4| 145.0|       3.8|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |346.3|349.2|       2.9|  2.6|   4.0|       2.7|      Cob|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |412.4|415.8|       3.4|  1.4|   5.2|       1.5|Carmen HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |431.2|431.7|       0.5|  6.0|  31.3|       6.5|   Carmen|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |MTRD-511 |   35  |114.0|120.0|       6.0|  0.3|  62.6|       1.3|      Cob|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |190.0|202.0|      12.0|  1.8| 130.8|       4.0| Hilos HW|
    |         |       |     |     |          |     |      |          |     Play|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |196.0|198.0|       2.0|  4.5| 244.0|       8.5| Hilos HW|
    |         |       |     |     |          |     |      |          |     Play|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |210.0|224.0|      14.0|  4.5| 112.4|       6.4|    Hilos|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |210.0|212.0|       2.0| 10.5| 279.0|      15.2|    Hilos|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |218.0|220.0|       2.0| 13.3| 239.0|      17.2|    Hilos|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |271.9|276.7|       4.8|  0.5|  35.6|       1.1| Hilos FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |366.7|371.2|       4.5| 12.7|   9.7|      12.9|Carmen HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |366.7|368.2|       1.5| 36.8|  10.5|      37.0|Carmen HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |377.2|383.0|       5.8|  6.4|  18.1|       6.7|   Carmen|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |380.2|381.7|       1.5| 20.0|  24.4|      20.4|   Carmen|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |394.8|398.2|       3.4|  2.1|   1.4|       2.2|Carmen FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |MTRD-514 |   35  |305.7|308.8|       3.1|  1.2|  30.0|       1.7|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |307.7|308.8|       1.1|  2.4|  77.6|       3.7|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |547.4|549.2|       1.8|  7.1|  20.2|       7.4|    Hilos|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |680.9|686.1|       5.2|  1.0|   0.3|       1.0|   Carmen|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |MTRD-515 |   28  |166.0|173.5|       7.5|  1.0|  44.0|       1.7|  Unknown|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |166.0|168.0|       2.0|  2.9|  90.6|       4.4|  Unknown|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |314.0|316.5|       2.5|  0.7|  14.2|       0.9|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |337.5|339.0|       1.5|  6.1| 127.0|       8.2|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |355.7|363.0|       7.3|  0.5|   5.0|       0.6|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |367.5|370.5|       3.0|  0.7|  23.5|       1.0|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |414.5|419.0|       4.5|  1.1|   4.2|       1.2|      Cob|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |522.5|526.5|       4.0|  1.9|   6.3|       2.0|   Carmen|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |MTRD-516 |   37  |118.0|144.0|      26.0|  0.5|  68.2|       1.6|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |118.0|122.0|       4.0|  1.6| 168.7|       4.4|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |160.0|162.0|       2.0|  2.7|  93.0|       4.3|   Cob HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |172.0|190.0|      18.0|  0.9|  29.9|       1.3|      Cob|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |172.0|174.0|       2.0|  1.7| 125.0|       3.7|   Cob FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |219.1|222.0|       5.8|  0.6|   3.2|       0.6| Hilos HW|
    |         |       |     |     |          |     |      |          |     Play|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |239.2|245.5|       6.3|  1.2|  39.4|       1.9|    Hilos|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |239.2|241.0|       1.8|  3.2|  80.8|       4.5|    Hilos|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |252.6|255.9|       3.3|  1.4|  13.8|       1.6| Hilos FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |253.7|254.8|       1.1|  2.8|   9.6|       3.0| Hilos FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |273.0|284.6|      11.6|  1.0|  31.5|       1.6| Hilos FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |274.0|275.1|       1.1|  5.3|  27.5|       5.7| Hilos FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |277.5|278.7|       1.2|  3.0|  37.6|       3.6| Hilos FW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |411.8|419.3|       7.5|  1.6|  22.3|       1.9|Carmen HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |412.9|413.8|       0.9|  5.5| 160.0|       8.1|Carmen HW|
    |         |       |     |     |          |     |      |          |    Splay|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |and      |       |431.6|433.7|       2.1|  3.6|  53.7|       4.5|   Carmen|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|
    |including|       |433.1|433.7|       0.6|  8.1| 106.0|       9.8|   Carmen|
    |_________|_______|_____|_____|__________|_____|______|__________|_________|

* True widths are expected to range between 65% and 85% of the intervals
reported on the table above.

**Gold equivalent grade assumes equivalence of 60 grams of silver to one
gram of gold.

**** NSR = No significant result

 

SOURCE Kimber Resources Inc.


Source: PR Newswire