Last updated on April 19, 2014 at 21:20 EDT

MAX drills 293 m of 5.49 g/t silver, 0.10 g/t gold and 0.09% copper in porphyry-style alteration zone with significant sulfides at Majuba Hill, Nevada

March 15, 2012

Frankfurt: M1D

VANCOUVER, March 15, 2012 /PRNewswire/ – MAX Resource Corp. (TSX.V: MXR; OTCBB: MXROF; Frankfurt: M1D) has received assay results from hole MM-20, the final hole drilled
during a step out drill program completed at its Majuba Hill
copper/silver/gold project in Nevada during the fall of 2012.


        --  Hole MM-20 intercepted 293 m of 5.49 g/t Ag, 0.10 g/t Au and
            0.09% Cu in sulfide mineralization in a porphyry-style
            alteration zonediscovered below the high grade Ag/Cu/Au oxide
            zone identified by MAX during Phase I drill in early 2011 (see
            our news release of October 25, 2011)
        --  Gold mineralization grading 0.145 g/t Au was intercepted over
            the final 116 m of Hole MM-20, which was still in
            mineralization when terminated at the planned target depth due
            to inclement weather.
        --  This hole was drilled 100 meters southeast of MAX's Phase I
            drilling, to test underneath the high grade supergene zone
            where MAX reported five holes intersecting high grade copper
            and silver oxide mineralization that included 96 m of 39.2 g Ag
            and 0.57% Cu starting at surface.  Hole MM-20 was drilled due
            north at a -44 degree angle to a depth of 323.9 m
        --  Hole MM-20 intersected sulfide mineralization, below the
            supergene (oxide) mineralization zone, that contains
            Chalcopyrite, Pyrite and Molybdenite in a hydrothermally
            altered mineralized zone indicative of the primary zone of a
            porphyry system.
        --  Permitting is underway for 5,000 m Phase III drill program that
            will continue to test the high grade supergene mineralization
            above the primary zone intercepted by hole MM-20 as well as
            initiate delineation drilling at the DeSoto discovery zone 1.4
            km to the northwest with a view to outlining an initial NI
            43-101 compliant resource estimate by the end of the year.

The following table summarizes the intervals and grades identified in
Hole MM-20:

      Total  From   To   Thickness  Silver     Gold   Copper Molybdenum
      Depth   (m)   (m)     (m)      (Ag)      (Au)    (Cu)     (Mo)

    323.9 m  31.1  323.9    292.8  5.49 g/t 0.10 g/t  0.09%     .008%

    Includes 207.3 323.9    116.6  6.3 g/t  0.145 g/t 0.13%     0.013%

Clancy Wendt, VP Exploration of MAX, states “We are very impressed by
this intersection of the primary zone and slightly hydrothermally
altered mineralization in this first deep hole at Majuba Hill. The
increase in gold and molybdenum mineralization at depth and the long
intersections of mineralization add more evidence that Majuba Hill is
an extensive copper/silver/gold porphyry system that is highly
prospective for the development of a bulk-tonnage open pit deposit. 
This discovery allows us to concentrate on defining the supergene
system located above this zone, with drilling in 2012 to test the
extension of high grade oxide mineralization from the Copper Stope to
the southeast along the ridge above hole MM-20.”

A map showing drilling locations from the 2011 exploration program at
Majuba Hill is available on our web site at www.maxresource.com.

Majuba Hill is the site of numerous past producing mines, with historic
production reported of 12% Cu (Mason Valley Copper, 1918) and silver
grades up to 40 oz/t Ag.  Majuba Hill encompasses 2,568 acres of
surface and mineral rights that includes patented lode mining claims. 
The property is easily accessed via 23 miles of well-maintained dirt
roads leading from U.S. Interstate 80, and lies 30 miles northwest of
Coeur d’Alene’s Rochester silver mine, which contains a NI 43-101
compliant Measured and Indicated Resource of 263.9 million tons grading
0.46 oz/ton Ag and 0.004 oz/ton Au.  (The Coeur Technical Report on the
Rochester Mine is available on SEDAR). For more detailed information on
the Majuba Hill copper/silver project, including maps showing the
results of soil sampling and the drilling completed to date, please
visit our web site at www.maxresource.com.

This news release has been reviewed by Mr. Clancy J. Wendt, P. Geo, a
“qualified person” as that term is defined under National Instrument
43-101.  The historic information provided has not been verified by MAX
and is for reference only.

About MAX Resource Corp.

MAX Resource Corp. is a Canadian exploration company focused on gold and
silver exploration in Nevada. For more information, please visit our
web site at www.maxresource.com.

On behalf of the Board of Directors of
MAX Resource Corp.


Stuart Rogers

Neither the TSX Venture Exchange nor its Regulation Services Provider
(as that term is defined in the policies of the TSX Venture Exchange)
accepts responsibility for the adequacy or accuracy of this release.

This News Release includes certain “forward looking statements”. Without
limitation, statements regarding potential mineralization and
resources, exploration results, and future plans and objectives of the
Company are forward looking statements that involve various degrees of
risk. The following are important factors that could cause MAX’s actual
results to differ materially from those expressed or implied by such
forward looking statements: changes in the world wide price of mineral
commodities, general market conditions, risks inherent in mineral
exploration, risks associated with development, construction and mining
operations, the uncertainty of future profitability and the uncertainty
of access to additional capital.

SOURCE MAX Resource Corp.

Source: PR Newswire