Quantcast
Last updated on April 18, 2014 at 21:21 EDT

Loctite® Liquid Optically Clear Adhesives Advance Touch Panel and Display Assembly

June 8, 2012

ROCKY HILL, Conn., June 8, 2012 /PRNewswire/ — As touch panel interfaces become the norm on mobile devices, laptops and tablets, Loctite® Liquid Optically Clear Adhesives (LOCA) from Henkel Corporation are improving the viewing experience, increasing display durability, extending product life, reducing power consumption and enabling thinner device designs. New dual cure technologies allow full cure in shadowed areas, and offer vastly reduced shrinkage to control display distortion and eliminate mura.

When used on AR glass, Loctite® LOCA products increase the contrast ratio in sunlight by 400 percent and minimize the refractive index mismatch to glass and PMMA, minimizing light loss due to reflection. Reduced light loss means the user enjoys a superior viewing experience and the device consumes far less power, which extends battery life. Loctite® LOCA products increase display robustness significantly; for example, LOCAs can increase ball-drop impact resistance as much as 300 percent for gaps up to 1 mm. And displays withstand higher heat and humidity, and resist temperature cycling. As they absorb impact load and protect gap-free display surfaces, these adhesives allow the production of thinner panels.

The seven products in the Loctite® LOCA line include two dual cure adhesives designed to cure in shadowed area where light cannot reach. Loctite® 5192(TM) is a high-temperature-resistant, non-yellowing UV/moisture cure silicone that shrinks very little and contributes minimal stress to the surface of the LCD, reducing mura defects. Loctite® 3192(TM) is a general-purpose UV/heat cure acrylic with a refractive index that delivers excellent brightness, clarity and color. Ideal for high volume production, this product heat cures in just one minute at 80 degrees C.

Designed for both TP1 (touch panel to cover lens) and TP2 (cover lens to LCD) bonding, Loctite® 3196(TM) is a general-purpose, impact-absorbent UV acrylic that protects the display surface from damage. This unique adhesive can also replace the air gap designed into TP2 applications. UV cure Loctite® 3193(TM) delivers high adhesion to plastic, while Loctite® 3195(TM) is a general-purpose adhesive for TP1 glass-to-glass bonding. Loctite® 3195DM(TM) is a high viscosity dam material compatible with most UV acrylic LOCAs. Loctite® 5192DM(TM) is a high viscosity silicone dam material designed for use with Loctite® 5192(TM) UV/moisture cure silicone.

Loctite® LOCAs provide better adhesion and reliability than optically clear double-sided tapes, are more suitable to large panel assembly, and are much better for gap filling. Compatible with many display and touch panel sizes, LOCAs eliminate the need to inventory die-cut OCAs in varying sizes. LOCA products can be applied and cured using automated processing equipment with little surface preparation. Repair and rework is done during pre-curing phases of the assembly process.

For more information on Loctite® LOCA adhesives and dispensing/curing equipment or to download a copy of the Loctite® LOCA brochure, go to www.henkelna.com/loca.

Henkel operates worldwide with leading brands and technologies in three business areas: Laundry & Home Care, Cosmetics/Toiletries and Adhesive Technologies. Founded in 1876, Henkel holds globally leading market positions both in the consumer and industrial businesses with well-known brands such as Persil, Schwarzkopf and Loctite. Henkel employs about 47,000 people and reported sales of $21.7 billion and adjusted operating profit of $2.8 billion in fiscal 2011. Henkel’s preferred shares are listed in the German stock index DAX and the company ranks among the Fortune Global 500.

SOURCE Henkel Corporation


Source: PR Newswire