Magnalight.com Fills Void in Explosion Proof Lighting Industry with Addition of Paint Booth Approved LED Light Fixtures
KEMP, Texas, July 18, 2012 /PRNewswire/ — Larson Electronics’ Magnalight.com has announced the addition of a paint booth approved LED light fixture designed to provide operators in hazardous locations with a powerful yet lightweight and efficient fixture that costs less than comparable integrated LED hazardous location fixtures. With non integrated LED fixtures with paint approval currently unavailable from most manufacturers the, Epl-48-2l-led from Magnalight fills a void in the hazardous location lighting industry with upgradability, established approval, and immediate availability.
The Epl-48-2l-led explosion proof LED light fixture from Larson Electronics’ Magnalight.com is a powerful, upgradeable, lightweight and affordable LED lighting solution that gives operators in hazardous locations an immediate solution to their HAZLOC lighting needs. Designed for heavy duty use, this LED light fixture is built on a platform similar to fluorescent paint booth fixtures, but offers greatly increased performance through the inclusion of LED tubes instead of fluorescents. Rated at 50,000 hours of operation and with a color temperature of 5300k, the LED tubes in these fixtures offer more efficient operation and longer life without sacrificing light quality or output. Most available brands of paint booth approved LED light fixtures are of an integrated lamp design, meaning in order to replace or upgrade the lamps for higher output you must replace the whole fixture. The Magnalight Epl-48-2l-led provides the ability to replace LED lamps as more powerful and efficient units become available or lamps reach the end of their service life, further increasing the value and versatility of these fixtures as operators need only replace the lamps if they wish to increase output or re-lamp. The non integrated design of these fixtures and the lack of internal ballasts, which is not needed with LED lamps, also makes this unit substantially lighter than comparable integrated design fixtures. While an integrated LED fixture typically weighs in the neighborhood of 60 lbs or more, the Epl-48-2l-led weights only 45 lbs, making it much easier to manage during installation. Currently, most manufacturers of integrated explosion proof lights do not have a ready supply of paint booth approved units available, and lead times for available units can be as long as 3 months. Magnalight maintains a ready supply of paint booth approved fixtures in inventory, which allows them to provide fast turnaround and in some cases same day shipping. Additionally, with most comparable fixtures for class rated environments averaging $1,000 or more in cost, the Magnalight Epl-48-2l-led is priced under $900, making it more affordable and faster to recoup investment. As with all of Magnalight’s explosion proof LED lighting, these units also provide a significant reduction in operating and maintenance costs through reduced bulb replacement intervals and lower energy consumption. These fixtures are constructed of copper free aluminum with heat and impact resistant Pyrex lamp tubes for excellent durability, and feature extruded aluminum reflectors with a high gloss finish for even and uniform light distribution. The Epl-48-2l-led can be operated from universal 120-277VAC 50/60 Hz electrical current, and optional 12/24VDC configurations are available for use with low voltages. These lights carry Class 1 Division 1, Groups C and D and UL paint spray booth approval, and are UL approved for marine and salt water type use as well. For operators who require explosion proof lighting with paint spray booth approval, the Epl-48-2l-led offers an affordable high performance alternative that can be ordered, delivered, and installed in less time than it takes most manufacturers to simply deliver a comparable integrated LED fixture.
“The Epl-48-2l-led explosion proof LED light is now 30% brighter than it was six months ago,” said Rob Bresnahan with Larson Electronics’ Magnalight.com. “The upgrade path to more lumens for our explosion proof linear fixtures is inexpensive and easy. Operators simply change out the LED module to a brighter package, instead of replacing the entire fixture. This Class 1, Class 2 and paint spray rated fixture is lightweight, easy to install and provides the type of light coverage expected from fluorescents without the hassle of fluorescents bulbs and ballasts. Finally, it is very cost effective when compared to some of the metal halide LED conversions entering the marketplace for hazardous areas.”
Larson Electronics’ Magnalight.com carries an extensive line of explosion proof LED lights, hazardous location lights, intrinsically safe LED lights, portable explosion proof lights and intrinsically safe LED flashlights. You can view Larson Electronics’ entire Magnalight line of explosion proof lighting at Magnalight.com. Magnalight can be reached directly by calling toll free, 1-800-369-6671 or 1-214-616-6180 for international inquiries.
Media contact – Robert Bresnahan – 1-800-369-6671
SOURCE Larson Electronics