Quantcast
Last updated on April 18, 2014 at 17:24 EDT

Western Pacific enters agreement to acquire the Deer Trail Mine, Piute County, Utah

February 26, 2013

VANCOUVER, Feb. 26, 2013 /PRNewswire/ – Western Pacific Resources Corp. (the “Company” – WRP: TSXV) is pleased to announce that it has entered into an agreement to
acquire, through its U.S. subsidiary, the Deer Trail Mine located in
Piute County, Utah from the Deer Trail Mining Company, LLC (“DTMC”), a
subsidiary of Unico, Inc.

Warwick Smith, CEO of Western Pacific, comments: “Acquiring the Deer
Trail Mine is a significant milestone for Western Pacific.  This
transaction provides the platform to transform the Company from an
explorer to a producer.  Although further evaluation will be
undertaken, we feel this property could go back into production within
the next 12 – 18 months with a low capital investment.  The timing was
right for Western to acquire this incredible project for $7 million to
be paid over two and a half years. Shareholders can expect 2013 to be a
strong year for newsflow.”

Eric Saderholm, President of Western Pacific, states: “In addition to
the known polymetallic deposits (mineralization occurs in oxide and
sulphidic ore), there are numerous other potential targets at Deer
Trail, including Moly-Porphyry targets and gold-rich veins and skarns. 
This mining district is vastly under-drilled and under-explored which
provides significant upside potential for discovery by Western
Pacific.  Our review of the data provided by the mine’s former
operations team identified numerous targets for exploration and
potential new mines.  I believe there are tremendous possibilities for
increasing the known mineralization within the current mine and for
additional discoveries in and around Deer Trail.  We look forward to
exploring the immediate and long term potential of this exciting
property and moving it forward toward production.”

Acquisition Terms

Pursuant to the Agreement, the Company will pay to DTMC a total of $7
million (Canadian) over 2.5 years as follows:

        --  on closing, $1,825,000 in cash
        --  on closing, the transfer of the Company's Bombardier property,
            which the parties have assigned a value of $1,500,000;
        --  twelve months after closing, $2,000,000 subject to acceleration
            of payment if the mine is in commercial production; and
        --  thirty months after closing, $1,675,000 subject to acceleration
            of payment if the mine is in commercial production.

The Company will retain a right of first refusal for 36 months after
closing in respect of a proposed sale of the Bombardier property by
DTMC to a third party.  If DTMC sells the Bombardier property after the
30(th) month following closing for less than $1,500,000, the Company will pay
DTMC a “make whole” payment equal to the difference between the sale
price and $1,500,000. The Company may elect to satisfy up to 25% of the
total post-closing payments of $3,675,000 and 25% of any make whole
payment in its common shares, where the number of shares will be is
calculated based on 85% of the twenty day volume weighted share price.

The closing of the Acquisition is subject to customary closing
conditions, including the acceptance of the TSX Venture Exchange, and
the waiver by Crown Mines, L.L.C. (“Crown“) or expiration of its right of first refusal in respect of the DTMC
mining claims and certain of the related assets. Crown has until March
26, 2013 to exercise such right.

Deer Trail Mine Location

The Deer Trail Mine is located in Piute County, central Utah,
approximately 5 miles SSW of Marysvale.  The project encompasses 3,275
acres of prospective ground within 5 square miles and includes workings
known as the Upper Deer Trail Mine, the Lower Deer Trail Mine, and the
Carissa and Lucky Boy Mines.

Utah was ranked 4th nationally by the U.S. Geological Survey in 2011 for
the value of nonfuel mineral production in the United States, making up
6.2% of the total value.  Nonfuel mineral production was valued at $4.6
billion–$2.6 billion of this amount was attributed to base-metal
production, $1.2 billion from industrial minerals and $0.7 billion from
precious metal production.

Photo Gallery of Deer Trail Mine

http://www.westernpacificresources.com/s/ProjectPhotos.asp

Maps and Sections

http://www.westernpacificresources.com/i/pdf/DTM-Cross-Sections-and-Maps.pdf

Geology

The Deer Trail Mine is located near the center of the Marysvale volcanic
field in the High Plateaus of west-central Utah, forming a transition
between the Colorado Plateau and the basin-range provinces.  The main
adit of the mine, the PTH tunnel, crosses the range bounding Tushar
fault zone that separates Paleozoic and Mesozoic sedimentary rocks. 
The DTM includes several Pb-Zn-Ag-Au-Cu manto deposits, with mine
workings exposing westerly dipping sedimentary rocks of three units: 
The Toroweap and Queantoweap Formations and the Callville Limestone. 
The ore body is in the lower part of the Toroweap Formation and
consists of a nearly continuous group of semiconcordant replacement
bodies flanking a central vein.  Roughly half of this orebody is
oxidized and is exposed in the working of the Upper Deer Trail Mine,
known as the Old Deer Trail Mine; the other half is located in the
8,600 area workings of the Lower Mine and consists of unoxidized
sulphide ore.  The Queantoweap Formation underlying the Toroweap, is a
quartzite and hosts no known mantos.  The 3,400 area of the Lower Mine
underlies the Callville Limestone.

Exploration

The project encompasses an attractive portfolio of advanced-stage
properties at both Upper and Lower Deer Trail, and in addition, two
other potentially large-scale exploration targets.  The first is the
Deer Trail Mountain Porphyry.  Alteration patterns, geochemistry and
structural features indicate that further testing should occur to test
for a deep Molybdenum Porphyry target.  The second exploration target
is the Mississippian Redwall Limestone.  Future work may include
testing between 800-2,000 ft below DTM workings.

Permits & Infrastructure

The Deer Trail Mine has a Large Scale Mining Permit issued by Utah Div.
of Oil, Gas & Minerals. Extensive infrastructure is in place, including
a mill complex with a 250 tpd (capacity) flotation mill and crusher,
and a developed network of timbered and ventilated tracks extending 5
miles, some of which need repair.  Other infrastructure includes:

        --  Year-round water supply-- ownership of and leasehold
            interests in water rights
        --  Substation on regional electric grid
        --  Mill complex: 250 ton/day flotation mill with crusher- (the
            mill was last in operation at a rate of 100-130 tpd in 2008)
        --  General Office, lab and sampling facility- laboratory built in
            early 2000's
        --  5+ miles of timbered and ventilated adits with tracks
        --  Two battery locomotives and several 1.5 ton ore cars
        --  Engine storage and charging house
        --  Miners locker room
        --  Compressor building
        --  All weather road to US highway 89
        --  Major rail arteries within 75 miles plus interstate highways 15
            and 70 within 30 miles
        --  Regional service and supply center half an hour from the
            property

Most Productive Periods at DTM

     __________________________________________________________
    |Mine Area |Period   |Tonnage  |Au   |Ag   |Zn%  |Pb% |Cu% |
    |          |         |         |opt  |opt  |     |    |    |
    |__________|_________|_________|_____|_____|_____|____|____|
    |Upper     |1918|1923|138,000  |1.380|11.49|NA   |3.26|NA  |
    |DTM       |    |    |         |     |     |     |    |    |
    |__________|____|____|_________|_____|_____|_____|____|____|
    |          |    |    |         |     |     |     |    |    |
    |__________|____|____|_________|_____|_____|_____|____|____|
    |3,400 Area|1945|1962|12,226 of|0.171|11.61|7.45 |2.96|0.52|
    |(Lower    |    |    |25,600   |     |     |     |    |    |
    |DTM)      |    |    |         |     |     |     |    |    |
    |__________|____|____|_________|_____|_____|_____|____|____|
    |          |    |    |         |     |     |     |    |    |
    |__________|____|____|_________|_____|_____|_____|____|____|
    |8,600 Area|1964|1980|100,000  |0.100|15.00|12.00|5.00|0.60|
    |(Lower    |    |    |         |     |     |     |    |    |
    |DTM)      |    |    |         |     |     |     |    |    |
    |__________|____|____|_________|_____|_____|_____|____|____|

Source: Unico Annual Report Feb 28, 2010 http://www.sec.gov/Archives/edgar/data/1110737/000102317510000176/f10k61110final614.htm

History

Deer hunters first discovered the Deer Trail mineralized body
outcropping at surface in 1878.  Since 1975, Phelps Dodge, Noranda
Exploration, Battle Mountain Gold and Cominco American have explored
the property.

Between 1878 and 1917 around 10,000 tons of material were mined until a
small mill was installed in 1918.  Between 1918-1923 the mine produced
around 138,000 tons of predominantly oxide material averaging 1.38
ounces per ton gold, 11.49 ounces per ton silver and 3.26% lead (zinc
and copper were not recovered).

In 1923 mining was suspended when the workings encountered a fault that
cut off the mineralized material, and for more than 20 years production
was limited to drawing stopes and removing pillars.

In 1945 the PTH tunnel was started to explore for the faulted extension
of the known mineralized body. After drifting 3,400 feet a new
mineralized body was encountered and became the primary production
area.  In 1945, 5,000 tons of material averaging 2.84% lead, 0.76%
copper, 6.26% zinc, 15.17 ounces per ton silver, and 0.19 ounces per
ton gold were mined.  The PTH tunnel was extended more than 10,000 feet
with a developed network of tunnels, shafts and raises.  By 1964 the
PTH tunnel had intersected the offset part of the mineralized body at
Deer Trail.  Between 1964-1981 this segment produced over 100,000 tons
of unoxidized sulphide mineralized materials averaging 15 ounces per
ton silver, 0.10 ounces per ton gold, 12% zinc, 5% lead and 0.6%
copper.  The present working face is still in mineralized material.

Royalty

There is a perpetual royalty on the Deer Trail Mine project to be paid
to Crown Mines, L.L.C. in the amount of three percent (3%) on minerals
other than gold, and five percent (5%) on gold. Crown Mines, L.L.C.
also retains an undivided three percent (3.0%) interest in any oil and
gas and associated hydrocarbons produced from the claims.

About Western Pacific

Western Pacific is a resource company transitioning into a polymetallic
producer. Western is focused on advancing a strong portfolio of
advanced-stage projects in the Western United States, including the
permitted Deer Trail Mine, Piute County, Utah. Dedicated to achieving
profitable production, Western’s team is led by technical and financial
experts who aim to succeed in creating shareholder value.  For more
information, please visit our website at www.westernpacificresources.com.

Qualified Person

Clancy Wendt, M.Sc., a registered geologist in Arizona and British
Columbia and a member of SME, SEG FAusIMM(CP) and PDAC, is Western
Pacific’s Qualified Person for the purposes of NI 43-101.  Mr. Wendt
has approved the disclosure of the scientific and technical information
contained in this news release.

ON BEHALF OF THE BOARD

Warwick Smith, Chief Executive Officer

Neither the TSX Venture Exchange nor the Investment Industry Regulatory
Organization of Canada accepts responsibility for the adequacy or
accuracy of this news release.

This news release contains forward-looking information, which involves
known and unknown risks, uncertainties and other factors that may cause
actual events to differ materially from current expectation.  The
ability of the Company to successfully complete the DTM acquisition on
time or at all and the Company’s ability to successfully place the
acquired assets back into production are subject to various risks and
other factors, including , the waiver by Crown Mines, L.L.C. or
expiration of its right of first refusal, the risks of obtaining
necessary licenses and permits to place the DTM assets back into
production, diminishing quantities or grades of reserves; the
availability of funds, the results of financing and exploration
activities, political or economic developments in the jurisdictions in
which the Company carries on business; operating or technical
difficulties in connection with development or mining activities;
employee relations; availability and costs associated with mining
inputs and labor; the speculative nature of exploration and
development, the interpretation of drilling results and other
geological data, risks associated with the estimation of mineral
resources and the geology, grade and continuity of mineral deposits,
project cost overruns or unanticipated costs and expenses. Such risks
and other factors (which are also disclosed in the Company’s documents
filed from time to time on SEDAR at www.sedar.com) may cause actual results to differ materially from the Company’s
expectations.

Readers are cautioned not to place undue reliance on these
forward-looking statements, which speak only as of the date of this
press release.  The Company disclaims any intention or obligation,
except to the extent required by law, to update or revise any
forward-looking statements, whether as a result of new information,
future events or otherwise.

 

SOURCE Western Pacific Resources Corp.


Source: PR Newswire