• E-mail
• Print
• Comment
• Font Size
• Digg
• del.icio.us
• Discuss article

Atmel Introduces Highly Integrated System-in-Package Solution for Automotive LIN Networking Applications

Posted on: Tuesday, 3 March 2009, 07:00 CST

HEILBRONN, Germany, March 3 /PRNewswire/ -- Atmel(R) Corporation (Nasdaq: ATML) announced today the availability of a new System-in-Package (SiP) solution for LIN automotive networking applications. The ATA6617, featuring maximum integration, is the first member of an upcoming LIN SiP family. It combines Atmel's LIN System Basis Chip (SBC) ATA6624 - including LIN transceiver, voltage regulator, watchdog - and a well-known AVR(R) microcontroller (ATtiny167 with 16k flash memory) in a single package. With this highly integrated solution, customers can create complete LIN nodes using just one IC.

The new LIN SiP is based on Atmel's second-generation LIN IP with excellent EMC and ESD performance. It is optimized for low-cost LIN slave applications and enables system cost reductions of up to 25%. A powerful LIN UART with integrated hardware routines simplifies protocol stack handling and limits the interrupt generation, thus reducing the microcontroller load and flash memory consumption. Simple assignment of an individual physical LIN node address, which is important in applications such as air-conditioning systems, can be realized by using an integrated 100 microampere current source.

One important criteria for LIN applications is low current consumption. To ensure that the LIN node's current consumption is well below 100 microampere in applications that are continuously connected to the battery, the ATA6617 provides several current saving modes where different functionalities are individually switched off or on, depending on the application requirements.

All pins of the LIN system basis chip and the microcontroller are bonded out, thus providing customers the same flexibility and performance for their applications as with discrete parts.

Thanks to the extremely small QFN38 package, measuring only 5 mm x 7 mm, designers can save more than 50% of PCB size compared to conventional solutions.

Availability and Pricing

Samples of the new LIN IC ATA6617 are now available in small QFN38 packages. Pricing starts at US $1.89 for 10k-piece quantities. Various cost-effective tools support designers with the development of LIN networks. A development board is available that enables a quick start with the IC and allows prototyping and testing of new designs. Certified LIN 2.0 and 2.1 protocol stacks from leading suppliers are also available. Further LIN SiP family members, including an 8 kB flash memory version, will be announced in Q2 2009.

Footnote EMC = Electro-Magnetic-Compatibility ESD = Electronic Static Discharge IP = Intellectual Property LIN = Local Interconnect Network PCB = Printed Circuit Board QFN = Quad Flat No leads SBC = System Basis Chip SiP = System-in-Package

About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions focused on consumer, industrial, security, communications, computing and automotive markets.

(C) 2009 Atmel Corporation. All Rights Reserved. Atmel(R), Atmel logo and combinations thereof, AVR(R) and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Information:

Product information on Atmel's LIN SiP IC ATA6617 may be retrieved at: http://www.atmel.com/dyn/products/product_card.asp?part_id=4522

Press Contacts: Dr. Susanne van Clewe, Marcom Director Automotive Phone: +49 7131 67-2081, Email: susanne.van-clewe@atmel.com Helen Perlegos, Public Relations Phone: +1 408 487-2963, Email: Helen.perlegos@atmel.com

SOURCE Atmel Corporation

Source: PR Newswire

More News in this Category