DeconGelÂ® Approved for Disposal at U.S. Department of Energy Waste Isolation Pilot Plant (WIPP)
HONOLULU, Sept. 10 /PRNewswire/ — After rigorous testing performed by the Savannah River National Laboratory (SRNL), the innovative decontamination product, DeconGelÃ‚®, has met requirements for safe transport to the U.S. Department of Energy’s Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico for disposal of transuranic waste (TRU).
To view the multimedia assets associated with this release, please click: http://multivu.prnewswire.com/mnr/cellularbioengineering/40561/
DeconGelÃ‚® was used at SRNL in a headspace simulation test of disposal of a decontamination agent in a waste package after a predetermined drying and packaging time. Testing concluded that the total volatile organic compound (VOC) content in the containers after aging was below 70 parts per million by volume (ppmV). This result is well below the 500 ppmV limit established by WIPP’s CH-TRAMPAC, the document authorizing transportation of TRU material payloads in approved packaging.
“The fact that DeconGel can safely be disposed of at WIPP has major implications for DeconGel as we are better able to serve a larger clientele and fulfill their transuranic waste disposal needs,” said Larry Stack, President and Chief Operating Officer of CBI Polymers.
SRNL began testing DeconGelÃ‚® for use as a decontamination agent for the decommissioning of one of Savannah River Site’s plutonium processing facilities. Given the levels of plutonium in the subject facility, the waste generated from decontamination would be considered TRU waste. TRU waste can be defined as waste containing alpha-emitting transuranic isotopes with half lives greater than 20 years, and more than 100 nanocuries of TRU isotopes per gram of waste.
The sole disposal facility for TRU waste in the United States is the WIPP. WIPP TRU disposal is regulated by the State of New Mexico under the New Mexico Hazardous Waste Act (HWA), which is pursuant to State authorization from the United States Environmental Protection Agency (EPA) under the Resource Conservation and Recovery Act (RCRA).
Meeting the limits for WIPP is a key milestone for demonstrating DeconGel’s usefulness in decommissioning a plutonium facility such as the one at the Savannah River Site. In order for waste to be transferred to WIPP, it cannot contain flammable mixtures of gases in confinement, or mixtures of gases that could become flammable when mixed with air. To ensure that this flammability restriction is met by those disposing of TRU at WIPP, WIPP requires headspace testing of each waste container for volatile organic compounds (VOCs) and flammable gases (e.g., hydrogen). While the predominant flammable gas of concern in TRU packages is hydrogen (due to radiolysis), the presence of methane and flammable VOCs is also limited to ensure the absence of flammable (gas/VOC) mixtures in TRU waste payloads. Testing showed that the VOCs in DeconGelÃ‚® would not significantly contribute to the flammable VOC levels in the headspace above TRU waste payloads.
DeconGelÃ‚®, a decontamination solution for chemical and radioactive threats, is a safe, peel away hydrogel that requires minimal training to use and has a stable shelf life. While DeconGelÃ‚® is gaining in use within Department of Energy sites for remediation of radiological, nuclear, and hazardous chemical substances, it’s also an essential product to keep on hand for hazardous materials (HAZMAT) or Chemical, Biological, Radiological and Nuclear (CBRN) first responder units concerned about immediate clean up after a major incident from accidents or acts of terrorism such as a dirty bomb.
Development of DeconGelÃ‚® was funded by the Hawaii Technology Development Venture (HTDV) / Office of Naval Research (ONR). Additional R&D funding was secured through the National Defense Center of Excellence for Research in Ocean Sciences (CEROS) under its contract with the Defense Advanced Research Projects Agency (DARPA), and the Department of Energy.
CBI Polymers focuses on polymer based products used in a variety of industries from nuclear decontamination to hazardous industrial chemicals and material decontamination.
In 2005, CBI Polymers was named a winner of the R&D 100 Award and was nominated for The 2009 National Medal of Technology and Innovation, the highest honor for technological achievement bestowed by the President of the United States on America’s leading innovators. In October, CBI Polymers was honored as one of three National Finalists for the Christopher Columbus Foundation Homeland Security Award for 2009.
About Cellular Bioengineering Inc. (CBI) Polymers and Skai Ventures, LLC
CBI Polymers is a wholly owned subsidiary of Skai Ventures LLC. Skai transforms and invests in novel ideas that can become disruptive technologies and products with global impact. Skai Ventures has multiple operating divisions including:
- Eyegenix(TM), which owns the global commercial rights to the artificial cornea technology reported above and holds the promise of returning sight to people worldwide who are blind from corneal disease through transplantation.
- CBI Polymers LLC manufactures a family of DeconGelÃ‚® products for the cost effective and environmentally sustainable decontamination of radioactive, nuclear, and chemical spills, and with additional applications in industrial cleaning and environmental remediation.
- TruTag Technologies LLC has developed TruTags(TM), an edible, nanoporous silica microtag that can be used for on-dose authentication of pharmaceuticals and nutraceuticals, protecting consumers from the health risks of counterfeit medicine. TruTags(TM) can also be used to authenticate implantable medical devices, consumer electronics, industrial parts and components, luxury goods, textiles and currency.
CBI Polymers, DECONGEL, EYEGENIX, SKAI, TRUTAG and INVENT. DISRUPT. INSPIRE. are trademarks of Cellular Bioengineering Inc., Skai Ventures, LLC and their affiliated companies. Copyright Ã‚© 2010 Skai Ventures, LLC. All rights reserved. All other trademarks are property of their respective owners.
Media Contact: Paula Page Public Relations (650)-279-3881 (cell) firstname.lastname@example.org
SOURCE CBI Polymers