Quantcast

Catalyst Copper Releases Estimated Resources Within La Verde Pit Shells

April 19, 2011

Trading Symbol: CCY

VANCOUVER, April 19 /PRNewswire/ – Catalyst Copper Corp. (the “Company” or “Catalyst) today announced the results of an independent study which developed pit
shells on the La Verde copper porphyry located in Michoacán State,
Mexico. Using the $2.50/lb copper pit as a base case, contained
Measured Resources plus Indicated Resources stand at 272.0M tonnes
grading at 0.37% Cu, plus Inferred Resources of 128.7M tonnes grading
0.35% Cu    (see Table 1).

Table 1: Mineral Resources contained within the US$2.50/lb Pit shell


    Measured               Indicated              Ms + Ind                Copper      Inferred                Copper

    (ktonnes)      Cu      (ktonnes)      Cu      (ktonnes)      Cu      (billion     (ktonnes)      Cu      (billion
                   (%)                    (%)                    (%)         lbs)                    (%)         lbs)

      29,819      0.45       242,209     0.36      272,028      0.37        2.22       128,720      0.35        0.99

Catalyst contracted a mineral industry consulting firm, Micon
International Limited (Micon), to construct the pit shells using the
recently completed NI 43-101 Block Model Resource (see December 15,
2010 news release). A sensitivity analysis was performed on La Verde
considering total Measured, Indicated and Inferred Resources using
copper prices ranging from $0.50/lb to $4.00/lb    (see Table 2; Figure
1).

Table 2: Sensitivity Analysis within pit shells constructed using copper
prices ranging from $0.50 to $4.00/lb


    Cu Price     CutOff     Measured              Indicated              Inferred                  Waste      Pit      Strip
                 Grade                                                                                       Depth     Ratio

    (US$/lb)       Cu%         (kt)      (%)         (kt)       (%)         (kt)      (%)           (kt)      (m)      (t:t)

    0.50          0.87            89     1.78           375     1.22           35     1.07           735      190      1.47

    1.00          0.43         9,358     0.68        26,198     0.63        2,160     0.56        76,559      340      2.03

    1.50          0.29        20,069     0.55        95,691     0.49       36,709     0.46       306,072      570      2.01

    2.00          0.21        26,317     0.48       194,111     0.39       89,840     0.38       610,778      670      1.97

    2.50          0.17        29,819     0.45       242,209     0.36      128,720     0.35       789,463      740      1.97

    3.00          0.14        31,914     0.43       271,717     0.33      150,549     0.33       845,767      760      1.86

    3.50          0.12        34,552     0.41       300,767     0.32      174,482     0.31       983,186      780      1.93

    4.00          0.11        35,956     0.39       317,650     0.31      188,042     0.30     1,066,207      810      1.97

The following parameters were used for the analysis (All costs are in US
dollars):

        --  Copper prices ranging from $0.50/lb to $4.00/lb.
        --  No gold, silver or molybdenum credits applied.
        --  Operating costs
      o Ore mining  $2.00/tonne.
      o Waste mining   $1.50/tonne.
      o Processing + G&A  $5.00/tonne.
        --  Ore recovery - 90%.
        --  Pit slope - 45°.
        --  No allowances for dilution or ore loses were included.

Economic parameters used in this study were based on associated costs
for comparable open pit copper operations. Recoveries are based on
historical metallurgical work carried out on La Verde mineralization in
the 1970s. The pit slope was estimated. No credit was given for
potential precious or base metal values such as gold, silver and
molybdenum.

Plans and sections of the pit shells have been posted on the Catalyst
Copper website: www.catalystcopper.com

Results of the Micon study reveal:

      1. Probable location and size of starter pits on both the East Hill
         (EH) and West Hill (WH) deposits at $1.00/lb Cu. Initial
         metallurgical test work planned for later this year will focus on
         these locations.

      2. High priority drill targets defined by areas of Inferred Resources
         fall within the pit shells. Of particular interest would be
         drilling to upgrade Inferred Resource targets located near the
         surface to Measured or Indicated Resources. Success here may
         improve the economics of the project by reducing the strip ratio.

      3. Projected mineralized extensions of the deposit lying outside of
         pit shells. Highest priority targets include north and south
         extensions of the WH deposit, the saddle area between the EH and
         WH deposits, south extension of the EH deposit and geophysical
         (IP) targets located south of La Verde.

Figure 1: Material within Pit Shells

http://files.newswire.ca/949/IZAapril19.pdf

All classes of resources — Measured, Indicated and Inferred — were used
in this study as its purpose was to guide further in-fill and
delineation drilling and as such one of the main targets of the ongoing
and future drilling would be Inferred Resources within the pit shells
shown.

Caution should be used in interpreting these results as the economic
parameters applied are estimates only and may not accurately reflect
current or future economic parameters. Due to the uncertainty that may
be attached to Inferred Mineral Resources, it cannot be assumed that
all or any part of an Inferred Mineral Resource will be upgraded to an
Indicated or Measured Mineral Resource as a result of continued
exploration.

The Company currently has approximately $2.5 million dollars in working
capital.  It is anticipated the 2011 work program will complete the
commitments with Teck Corporation to exercise the Company’s option to
earn a 60% interest in the property (see option summary at the end of
this release).

About La Verde

The La Verde project is located in an area with excellent
infrastructure. Power, rail and water all occur within the property
boundary. Lazero Cardenas, Mexico’s third largest port on the Pacific
Ocean coast, is 160 km from the site. Significant upside potential
remains for the two known zones of porphyry style copper, gold and
molybdenum mineralization as drilling has shown both deposits remain
open to depth and along strike.

The Block Model Resource was prepared by D. Makepeace, P.Eng., Senior
Geologist for Micon who is an independent qualified person as defined
by NI 43-101 (see News Release December 15, 2010 for more details). The
optimized pit shells were developed by J. Steedman, MAusIMM, who is an
independent qualified person as defined by NI 43-101. Both J. Steedman
and D. Makepeace have reviewed this news release.

La Verde property is subject to an option agreement with a Mexican
subsidiary of Teck Resources Limited (Teck) whereby Catalyst’s 100%
Mexican subsidiary, Minera Hill 29, may earn a 60% interest in La Verde
by making US$10,000,000 in exploration expenditures (including 30,000
meters of drilling and 200 kilometers of IP) by December 31, 2012. Upon
Catalyst earning a 60% interest, Teck has the option to increase its
interest to 60% by incurring aggregate expenditures equal to two times
the amount spent by Catalyst. Should Teck fail to exercise its option
to earn a 60% interest, Catalyst may acquire a 100% interest in La
Verde by paying to Teck US$20 million. The property is subject to an
underlying 0.5% NSR.

Catalyst Copper is a Vancouver-based publicly traded mine development company (TSX-V:
CCY) that optioned the La Verde copper porphyry target from a
subsidiary of Teck Resources Limited.

ON BEHALF OF THE BOARD OF DIRECTORS OF
CATALYST COPPER CORP.

Terence W. Hodson, P.Geo.

TERENCE HODSON, V.P. EXPLORATION,
QP for the Catalyst Copper Corp.

Certain information set forth in this news release may contain
forward-looking statements that involve substantial known and unknown
risks and uncertainties. These forward-looking statements are subject
to numerous risks and uncertainties, certain of which are beyond the
control of the Company, including, but not limited to, risks associated
with mineral exploration and mining activities, the impact of general
economic conditions, industry conditions, dependence upon regulatory
approvals, and the uncertainty of obtaining additional financing.
Readers are cautioned that the assumptions used in the preparation of
such information, although considered reasonable at the time of
preparation, may prove to be imprecise and, as such, undue reliance
should not be placed on forward-looking statements. Neither TSX Venture
Exchange nor its Regulation Services Provider (as that term is defined
in the policies of the TSX Venture Exchange) accepts responsibility for
the adequacy or accuracy of this release.

Quality Assurance: The Company employs a system of quality control for
drill results which includes the use of blanks, certified reference
materials (standards) and check assaying. Core is logged on site and
split with a diamond saw. Samples are shipped to Acme Analytical
Laboratories Ltd. for geochemical analysis of copper with all values of
greater than 1.000 parts per million copper being reanalyzed by assay
methods for copper, gold and silver.

 

 

 

SOURCE Catalyst Copper Corp.


Source: newswire



comments powered by Disqus