Quantcast
Last updated on April 19, 2014 at 1:20 EDT

Etlaser.com offers ET-1220 laser flat bed

June 24, 2012

Etlaser.com is proud to launches its large laser cutting machine ET-1220 laser flat bed

(PRWEB) June 23, 2012

Etlaser.com is proud to launches its large laser cutting machine ET-1220 laser flat bed. The main advantage of ET-1220 laser flat bed is the fact that it is a complete laser machine consists of two laser tubes that are installed directly on the mobile portal, moving on the Y axis of the working area. The laser tube can directly placed to the mobile portal of the laser machine to produce a constant stable power laser beam, which facilitates the adjustment of the production process and can handle large size material (laser cut cloth) in a short time.

ET-1220 laser flat can carry out laser cutting for a wide variety of nonmetallic materials. In addition, it is also acted as a laser engraving machine, because they can be applied to the work piece for precision images of any size and complexity at high speed (at a minimum application of laser engraving size is engraved symbols 1,5 x1, 5 mm). The laser machine is equipped with Flat Bed linear aluminum table whose design can stretch material on the Y axis, which allows users to handle material of unlimited length. The dimension of the working surface of the laser machine is 1200h2000/1500h2500 mm. In addition, ET-1220 laser flat has a monolithic body, which makes it impossible to disassemble the machine to pieces (these factors must be considered when deciding whether to transport the laser machine).

Like all the laser machines by Eastern Laser, ET-1220 laser flat bed is equipped with two laser tubes and two blocks firing with capacity of 80W. If necessary, at the request of the Buyer, it is possible to replace the laser tubes and blocks firing with more powerful ones (120 W). The power of the laser beam transmitted by the laser tube is governed by the operator of the laser machine, depending on the tasks (cutting or engraving).

The operator controls the laser machine by using a computer (connected via USB-port), or by using an LCD display with built-in keyboard, which is located directly on the laser machine. Built-in memory allows the operator of the laser machine to store and reuse the necessary working files. Laser machines work on a network of 220 V and requires a separate room equipped with a hood. ET-1220 laser flat bed has an automatic control of precision manufacturing process and produces high quality manufacturing products in a short time.

For the original version on PRWeb visit: http://www.prweb.com/releases/prweb2012/6/prweb9630860.htm


Source: prweb