June 27, 2012
First 3D Nanoscale Optical Cavities From Metamaterials
Berkeley Lab Development Holds Promise for Nanolasers, LEDs, Optical Sensors and Photonic Communications
The world´s smallest three-dimensional optical cavities with the potential to generate the world´s most intense nanolaser beams have been created by a scientific team led by researchers with the U.S. Department of Energy (DOE)´s Lawrence Berkeley National Laboratory (Berkeley Lab) and the University of California (UC) Berkeley. In addition to nanolasers, these unique optical cavities with their extraordinary electromagnetic properties should be applicable to a broad range of other technologies, including LEDs, optical sensing, nonlinear optics, quantum optics and photonic integrated circuits.By alternating super-thin multiple layers of silver and germanium, the researchers fabricated an “indefinite metamaterial” from which they created their 3D optical cavities. In natural materials, light behaves the same no matter what direction it propagates. In indefinite metamaterials, light can actually be bent backwards in some directions, a property known as negative refraction. The use of this indefinite metamaterial enabled the scaling down of the 3D optical cavities to extremely deep subwavelength (nanometer) size, resulting in a “hyperboloid iso-frequency contour” of light wave vectors (a measure of magnitude and direction) that supported the highest optical refractive indices ever reported.
This study was directed by Xiang Zhang, a principal investigator with Berkeley Lab´s Materials Sciences Division and director of UC Berkeley´s Nano-scale Science and Engineering Center (SINAM). He is the corresponding author of a paper describing this research titled “Experimental realization of three-dimensional indefinite cavities at the nanoscale with an anomalous scaling law,” which has been published in the journal Nature Photonics. Co-authoring this paper with Zhang were Xiaodong Yang, Jie Yao, Junsuk Rho and Xiaobo Yin.
“Our work opens up a new approach for designing a truly nano-scale optical cavity,” Zhang says. “By using metamaterials, we show intriguing cavity physics that counters conventional wisdom. For example, the quality factor of our optical mode rapidly increases with the decrease of cavity size. The results of this study provide us with a tremendous opportunity to develop high performance photonic devices for communications.”
Optical cavities are the major components of most lasers. Light confined within an optical cavity will be reflected back and forth between two opposing mirrors to produce a standing wave at a specific resonant frequency. It is from this standing light wave that a laser beam is generated. Optical cavities made from natural materials can be no smaller than the wavelength of the light propagating through them. Metamaterials, however, allow for electromagnetic behavior that is not attainable in nature. Engineered from a combination of metals and dielectrics — insulators that become polarized in the presence of an electromagnetic field — metamaterials derive their optical properties from their structure rather than their chemical composition, as is the case with natural optical materials.
“Due to the unnaturally high refractive index supported in the metamaterials, our 3D cavities can be smaller than one tenth of the optical wavelength,” says Xiaodong Yang, lead author of the Nature Photonics paper who is now with the Missouri University of Science and Technology. “At these nanoscale dimensions, optical cavities compress the optical mode into a tiny space, increasing the photon density of states and thereby enhancing the interactions between light and matter.”
Another advantage of using indefinite metamaterials to make their 3D optical cavities, Yang says, is that cavities with different sizes can have the same resonance frequency, providing more flexibility in the optical cavity design. Another advantage is that the photons lost when light is reflected back and forth — a problem for optical cavities from natural materials — is reduced as the cavity size gets smaller. Yang says this will benefit the design of future nanoscale lasers.
Germanium was the dielectric chosen to make this metamaterial because it has a relatively high refractive index (about 4.0), compared to air (1.0), which is the dielectric most typically used to make a metamaterial. The alternating layers of silver (20 nanometers thick) and germanium (30 nanometers thick) were cut into cubes of various sizes, depending on the number of metal/dielectric layers. The cube walls tilt into the shape of a trapezoid during the final stage of fabrication with a nano-sized optical cavity in the core.
“The hyperboloid iso-frequency contour of wave vector space in these cavities allowed us to reach very high wave vector values, Yang says. “As wave vector values are proportional to the refractive index, we were able to record optical refractive indices as large as 17.4, which is far beyond that found in natural materials.”
This research was supported by the U.S. Department of Air Force Office of Scientific Research.
On the Net: