Quantcast

Master Bond MB600S, A New Silver Conductive, One Part Aqueous Based Sodium Silicate System Available for EMI/RFI Shielding

May 28, 2013

Master Bond MB600S is a new, one component sodium silicate, aqueous based silver conductive coating system featuring effective shielding, temperature resistance up to 700°F and easy application.

(PRWEB) May 28, 2013

Master Bond MB600S is an aqueous based sodium silicate formulated for coating applications where electromagnetic interference/radio frequency interference (EMI/RFI) shielding is required.

The energy emitted from various sources, including radios and appliances, can interfere with other electronic devices. Conductive coatings are often applied to the housings in order to protect the devices from these types of interferences. This silver gray colored system is used in a variety of aerospace and electronic applications.

Tested according to IEEE 299, 2006 methods, MB600S was as effective as the aluminum reference with a range of 95-105 dB, from 100 MHz to 2 GHz. Above 2 GHz, the shielding effectiveness of MB600S decreased to 80 dB and slightly below. Above 4 GHz, the effectiveness was 60-70 dB.

As the system is water based, it is relatively non-toxic and easy to handle. It can be brushed or sprayed with the proper equipment. If sprayed, the shielding effectiveness would be even greater than the values given above.

MB600S will cure at room temperature in 24-48 hours or in 1-2 hours at 80°C. It features high temperature resistance with a service temperature range of 0°F to 700°F. The compound is available in glass jars, and has a shelf life of 6 months in original, unopened containers at room temperature.

Master Bond Electrically Conductive Systems

Master Bond MB600S is a silver conductive water based sodium silicate system for shielding applications that withstands temperatures up to 700°F. Read more about Master Bond´s electrically conductive adhesives, sealants, coatings and encapsulation compounds at http://www.masterbond.com/properties/electrically-conductive-adhesive-systems or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: technical(at)masterbond(dot)com.

About Master Bond Inc.

Master Bond´s product line includes over 3,000 different grades of advanced formulations. We will recommend a specific grade that provides the perfect solution for your application needs. These products are designed to solve a variety of design, manufacturing and repair/maintenance problems. They can increase productivity, reduce waste, save energy and improve your product´s performance.

For the original version on PRWeb visit: http://www.prweb.com/releases/prweb2013/5/prweb10774888.htm


Source: prweb



comments powered by Disqus