Researchers Study Waves On The FINO3 Research Platform
The location of the FINO3 research platforms, the “Dan Tysk” sand bank, is located approximately 80 kilometers to the west of Sylt where up to 80 wind power plants will be located in just a few years. FINO3 is used by researchers to estimate the environmental consequences and technical risks of offshore wind energy parks. Changes in the sea swell are also of great interest in addition to the observations of bird migration or the measurement of lightening frequencies on the sea.
To determine how much of an effect large waves and what is known as “Ëœbreakers’ have on wind power plants and to what extent the structures can change the surrounding swell, the coastal researchers of the Geesthacht GKSS Research Centre installed a Doppler radar approximately 50 metres above sea level on the FINO3 lattice mast.
“With our radar, we can even track the individual waves for the first time”, writes Dr. Freidwart Ziemer, GKSS Department Manager of Radar Hydrology, the unique part of the project. For several years, Ziemer and his team have studied the swell and the behavior of large breakers. The information is transmitted by FINO3 to Geesthacht via satellite.
Assessing swells better
The frequency of large breakers and the force which creates the steep giant waves are of particular interest not only to researchers but also the designers and operators of offshore wind power plants or oil platforms.
Each individual wind rotor creates turbulent air flows in its “tow” and periodical movements, which can have an effect on other structures. This can result in undesired or even dangerous vibrations. If there is an interaction between the waves and the individual wind power plants, this can result in interferences. This means in a wave field which is harmless without a windmill park, single, very high waves can be created by these interferences which could possibly have a critical effect on these plants.
“I am sure that we will soon be able to better assess the swells and the force of the breakers,” says Friedwart Ziemer. This means that the breaker behavior could be taken into account better in planning and the stability of the systems can be more predictable.
Solid position on the COSYNA North Sea monitoring system
The FINO3 research platform will be an important component in the new COSYNA measurement network initiated by GKSS. A comprehensive monitoring system will be created in the German North Sea area to record, predict and provide scientific analysis of the current state and development of the coastal waters with the major COSYNA project (Coastal Observation System for Northern and Arctic Seas).
FINO3 will provide the Geesthacht coast researchers information on seafaring and the wind. Breaker statistics are also planned. The Doppler radar technology was developed by the GKSS employees in unison with the Technical University of Saint Petersburg. The initial test readings with the new wave radar from the shore have already been carried out successfully.
The project coordinator of FINO3 is the research and development centre of the Kiel University of Applied Sciences (Fachhochschule Kiel GmbH). The project executing organization is the Federal ministry of the environment, natural protection and reactor safety (BMU).
Image 1: Credit Barton
Image 2: The wave radar of the Geesthacht coastal researchers on the FINO3 measurement platform. (Photo: F. Ziemer/GKSS Research Centre Geesthacht)
On The Net: