Last updated on April 20, 2014 at 5:20 EDT

NJIT Prof Offers New Desalination Process Using Carbon Nanotubes

March 14, 2011

A faster, better and cheaper desalination process enhanced by carbon nanotubes has been developed by NJIT Professor Somenath Mitra. The process creates a unique new architecture for the membrane distillation process by immobilizing carbon nanotubes in the membrane pores. Conventional approaches to desalination are thermal distillation and reverse osmosis.

“Unfortunately the current membrane distillation method is too expensive for use in countries and municipalities that need potable water,” said Mitra. “Generally only industry, where waste heat is freely available, uses this process. However, we’re hoping our new work will have far-reaching consequences bringing good, clean water to the people who need it.”

The process is outlined in “Water Desalination Using Carbon Nanotube Enhanced Membrane Distillation,” by Mitra and his research team in the current issue of the American Chemistry Society’s Applied Materials & Interfaces. Doctoral students Ken Gethard and Ornthida Sae-Khow worked on the project. Mitra is chairman of the department of chemistry and environmental science.

Membrane distillation is a water purification process in which heated salt water passes through a tube-like membrane, called a hollow fiber. “Think of your intestines,” said Mitra. “It’s designed in such a way that nutrition passes through but not the waste.” Using a similar structure, membrane distillation allows only water vapor to pass through the walls of the hollow tube, but not the liquid. When the system works, potable water emerges from the net flux of water vapor which moves from the warm to the cool side. At the same time, saline or salt water passes as body waste would through the fiber.

Membrane distillation offers several advantages. It’s a clean, non-toxic technology and can be carried out at 60-90ï¿Â½C. This temperature is significantly lower than conventional distillation which uses higher temperatures. Reverse osmosis uses relatively high pressure.

Nevertheless, membrane distillation is not trouble free. It is costly and getting the membrane to work properly and efficiently can be difficult. “The biggest challenge,” said Mitra, “is finding appropriate membranes that encourage high water vapor flux but prevent salt from passing through.”

Mitra’s new method creates a better membrane by immobilizing carbon nanotubes in the pores. The novel architecture not only increases vapor permeation but also prevents liquid water from clogging the membrane pores. Test outcomes show dramatic increases in both reductions in salt and water production. “That’s a remarkable accomplishment and one we are proud to publish,” said Mitra.

Another advantage is that the new process can facilitate membrane distillation at a relatively lower temperature, higher flow rate and higher salt concentration. Compared to a plain membrane, this new distillation process demonstrates the same level of salt reduction at a 20ï¿Â½C lower temperature, and at a flow rate six times greater.

“Together these benefits lead to a greener process which could make membrane distillation economically competitive with existing desalination technologies and we hope could provide potable water where it is most needed,” said Mitra.

On the Net: