NASA Developing Technology To Power Moon Missions
Posted on: Wednesday, 10 September 2008, 15:15 CDT
NASA astronauts will need power sources when they return to the moon and establish a lunar outpost. NASA engineers are exploring the possibility of nuclear fission to provide the necessary power and taking initial steps toward a non-nuclear technology demonstration of this type of system.
A fission surface power system on the moon has the potential to generate a steady 40 kilowatts of electric power, enough for about eight houses on Earth. It works by splitting uranium atoms in a reactor to generate heat that then is converted into electric power. The fission surface power system can produce large amounts of power in harsh environments, like those on the surface of the moon or Mars, because it does not rely on sunlight. The primary components of fission surface power systems are a heat source, power conversion, heat rejection and power conditioning, and distribution.
"Our goal is to build a technology demonstration unit with all the major components of a fission surface power system and conduct non-nuclear, integrated system testing in a ground-based space simulation facility," said Lee Mason, principal investigator for the test at NASA's Glenn Center in Cleveland. "Our long-term goal is to demonstrate technical readiness early in the next decade, when NASA is expected to decide on the type of power system to be used on the lunar surface."
Glenn recently contracted for the design and analysis of two different types of advanced power conversion units as an early step in the development of a full system-level technology demonstration. These power conversion units are necessary to process the heat produced by the nuclear reactor and efficiently convert it to electrical power.
The first design concept by Sunpower Inc., of Athens, Ohio, uses two opposed piston engines coupled to alternators that produce 6 kilowatts each, or a total of 12 kilowatts of power. The second contract with Barber Nichols Inc. of Arvada, Colo., is for development of a closed Brayton cycle engine that uses a high speed turbine and compressor coupled to a rotary alternator that also generates 12 kilowatts of power.
"Development and testing of the power conversion unit will be a key factor in demonstrating the readiness of fission surface power technology and provide NASA with viable and cost-effective options for nuclear power on the moon and Mars," said Don Palac, manager of Glenn's Fission Surface Power Project.
After a one year design and analysis phase, a single contractor will be selected to build and test a prototype power conversion unit. When complete, the power conversion unit will be integrated with the other technology demonstration unit's major components. Glenn will develop the heat rejection system and provide the space simulation facility. Glenn also will work in conjunction with the Department of Energy and NASA's Marshall Space Flight Center in Huntsville, Ala. Marshall will develop and provide a non-nuclear reactor simulator with liquid metal coolant as the heat source unit for the technology demonstration.
A nuclear reactor used in space is much different than Earth-based systems. There are no large concrete cooling towers, and the reactor is about the size of an office trash can. The energy produced from a space reactor also is much smaller but more than adequate for the projected power needs of a lunar outpost.
Testing of the non-nuclear system is expected to take place at Glenn in 2012 or 2013. These tests will help verify system performance projections, develop safe and reliable control methods, gain valuable operating experience, and reduce technology and programmatic risks. This technology demonstration is being conducted as part of NASA's Exploration Technology Development Program.
---
Image Caption: An artist’s concept of a fission surface power system on the surface of the moon. The nuclear reactor has been buried below the lunar surface to make use of lunar soil as additional radiation shielding. The engines that convert heat energy to electricity are in the tower above the reactor, and radiators extend out from the tower to radiate into space any leftover heat energy that has not been converted to electricity. The power system would transmit a steady 40 kW of electric power, enough for about eight houses on Earth, to the lunar outpost. Credit: Courtesy NASA
---
On the Net:
Related Articles
- Optosecurity Inc. Announces New Order From Bruce Power, a Leading Player in the Nuclear Industry
- Silicon Carbide Schottky Diodes from STMicroelectronics Deliver Instant Efficiency Boost for Solar Power, Server Systems, Motor Controllers, and More
- Delphi Introduces 'Most Comprehensive' High-Current/High-Power Connection Systems
- This U.S. Electric Transmission & Power Plants Systems Wall Map Excellently Renders Approximately 180 of the Largest Electric Transmission Lines in the United States
- Hydrogen & Fuel Cells: Advanced Transporation & Power Generation Systems
- In-Depth Analysis of Microwave Power Transmission & Solar Power Satellite Systems
- Methode Electronics Announces Completion of EIA Testing on New 2000 Amp PowerRail Pluggable Power Distribution System
- GridPoint Appoints Vice President of Sales, Randy Etheridge, Formerly With Caterpillar Power Generation Systems
- Plans Announced for Methane-to-Electric Project in White Township; Power Generation System Will Reduce Landfill Air Pollution and Generate Income
- TDK Semiconductor Unveils a New Member of Its Power Meter System-on-Chip Family
 |
 |
User Comments (2)
| 2. |
Posted by Ben on 09/11/2008, 10:26 As for why not to use the lunar terminator: it moves as the Moon rotates. (It rotates once every 27.3 days or so, which matches its orbital period around the Earth.) As for nuclear material in space, can you think of a better place for it? Even if the rocket exploded on departure, the contamination would be small enough that it would be less than background radiation. That would not a good thing, but it would not be the disaster that some would make it out to be. |
| 1. |
Posted by nobodysaysBOO on 09/11/2008, 09:53 why not just use the lunar terminator area for thermal solar power on the bright side and cold on the dark side, just like the deep ocean thermal differental systems tested in Hawaii, nucelar materials in space and launch systems can get very dirty even smal ones! |
RSS Feeds