August 1, 2006
International Space Station Set for Major Expansion
The next part of the International Space Station might resemble a cocoon when tucked inside Space Shuttle Atlantis for flight. But by the time it's deployed in space, the segment that will provide a quarter of the completed station's power capability will look more like an extremely large butterfly.
The port three and four (P3/P4) integrated truss segment is the prime payload of the STS-115 mission, scheduled to lift off from Launch Pad 39B at Kennedy Space Center, Fla., in late August or early September."The truss in its launch configuration is about 45 feet long, but once on orbit with the solar arrays deployed, it will have a wingspan of almost 240 feet," says Robbie Ashley, space station mission manager for the STS-115 mission.
The mission's main objective is to resume space station construction by installing and activating the segment during three scheduled spacewalks. The trusses are part of the 11-segment structure that will eventually span more than 300 feet when the station is completed.
"The P3/P4 element will be installed on what is now the end of the P1 port truss segment already on orbit," explains Ashley. "It's going to provide two primary capabilities, the first being power. The power module will provide the capability to generate, store, distribute and regulate power for the space station. It's going to supplement the capability that is up there now with the P6 element. In addition, the P3 half of the truss has a mechanism that's going to rotate all of the outboard truss segments, including the solar arrays, to allow them to stay pointed at the sun for optimal power-generation capability."
On Earth, the P3/P4 segment weighs almost 35,000 pounds -- one of the heaviest station payloads. It will be weightless in orbit, allowing the astronauts to remove the segment from Atlantis' payload bay using the shuttle's remote arm and hand it off to the space station's remote arm.
The astronauts will then maneuver the segment into place before attaching it to the P1 segment. The astronauts will need three spacewalks for the entire process.
A major spacewalk task will be deployment of the two solar wings. When extended, each solar wing will be 115 feet by 38 feet. They are deployed in opposite directions and each is made up of a center mast supporting a solar "blanket" on either side.
Each wing uses nearly 33,000 solar cells and on Earth would weigh more than 2,400 pounds. The two new wings are capable of generating enough power to meet the needs of 30 average homes, based on consumption of 2 kilowatts of power each.
The P3/P4 truss segment will be moved from the Space Station Processing Facility to Launch Pad 39B in a payload canister. It will then be transferred to the payload bay of Atlantis for launch on the STS-115 mission.
On the Net: