Quantcast

Universal 81W Chamber Parts Washer – Quality Cleaning for Parts in Baskets

July 2, 2012

Dürr Ecoclean announces the Universal 81W aqueous chamber washer to manufacturers seeking parts cleaning in the USA.

(PRWEB) July 01, 2012

Dürr maintains a continuous stock of these popular parts washers to decrease delivery times and help customers achieve their production goals on schedule. As customers invest in their cleaning capabilities, Dürr aims to be at the forefront of the selection process. http://www.durr-ecoclean.com/usa/cleaning/

Able to process 28 standard baskets per hour (over 23 ft³ per hour), the Universal 81W chamber washer delivers unbeatable aqueous cleaning and part drying for batch loads and staged parts. Most competing aqueous washers use only hot air blowing to dry parts. But hot air blowing alone can leave moisture on parts which results in spots and wreaks havoc on downstream processes. In some cases, the moisture leads to batch rejects and scrapping of parts. The built-to-stock 81W chamber washer from Dürr Ecoclean includes traditional hot air blowing and adds efficient vacuum drying to deliver parts that are totally dry. By drawing a vacuum on the batched parts, the moisture evaporates completely, even from blind holes and areas where blow-off air cannot reach.

The 81W is built-to-stock with 2 tanks. Parts cleaning is achieved through fluid agitation in Dürr´s rotating injection flood wash (IFW) chamber. Ultrasonics are applied to remove debris from difficult to reach cavities. All tanks provide aqueous flood change washing, so the wash solution is perpetually filtered and changed out to avoid recontamination by the wash solution itself.

The Universal 81W stores 8 cleaning programs. This allows customers to process a wide variety of parts in a single machine without retrofit. The cleaning programs are fully customizable and can be changed at any time. A start-up timer is provided to allow unattended warm-up before any shift. Operators will appreciate the 3-position manual load/unload conveyor provided for on the built-to-stock units (not shown in the photo).

About Dürr Ecoclean:

Dürr Ecoclean Group is the leading provider of industrial cleaning, automation and filtration solutions. The group provides innovative standard equipment, custom-designed system solutions and services to the automotive industry and its suppliers, as well as to general markets around the globe. As a member of the Dürr group of companies, Dürr Ecoclean maintains operating sites in Germany, France, Czech Republic, the U.S., China and India.

Dürr is a mechanical and plant engineering group that holds leading positions in the world market in its areas of operation. It generates a good 80% of its sales in business with the automotive industry. It also supplies the aircraft, machinery, chemical, and pharmaceutical industries with innovative production and environmental technology. The Dürr Group operates in the market with four divisions. Paint and Assembly Systems plans and builds paintshops and final assembly systems for the automobile industry. Application Technology provides automated paint application, sealing, and gluing with its robot technologies. Machinery and systems from the Measuring and Process Systems division are used in engine and transmission manufacturing and in final vehicle assembly, among other areas. The fourth division, Clean Technology Systems, is focused on processes to improve energy efficiency and on exhaust air purification. Dürr has 50 business locations in 23 countries worldwide and approximately 7,100 employees. The Group achieved sales of 1.9 billion in 2011.

For the original version on PRWeb visit: http://www.prweb.com/releases/prweb2012/7/prweb9657738.htm


Source: prweb



comments powered by Disqus