Christie Launches Matrix StIM WQ and Matrix SIM WQ, World’s Brightest Solid State WQXGA-Resolution Simulation Projection Systems
Features higher brightness, higher-resolution and increased performance for maximum dynamic image quality and most true-to-life training experience.
ORLANDO (PRWEB) December 05, 2012
Christie® a leader in simulation projection display and visualization solutions, takes solid state digital projection technology “to the next level” with the launch of the new Christie Matrix StIM WQ and Christie Matrix SIM WQ, the world´s first, fully integrated solid-state, WQXGA resolution projection systems designed specifically to address the requirements of today´s most demanding simulation training applications.
Built upon the unique, dual-input architecture first developed in the groundbreaking Christie Matrix StIM LED illuminated simulation projector — the first to provide independent control over both the visible and infrared spectrum — both the Christie Matrix StIM WQ and Christie Matrix SIM WQ provide the highest levels of light output available in an LED-based WQXGA projection system when used in a real-world training and simulation application.
The Christie Matrix StIM WQ and Christie Matrix SIM WQ feature 800 ANSI lumens, 4.1 megapixels of resolution, fully ruggedized chassis, ArrayLOC and the latest fully adjustable Christie AccuFrame smear-reduction technology for the most true-to-life image quality in the industry. Unlike alternative approaches to “smear reduction,” Christie AccuFrame is integrated into the Christie Matrix StIM WQ and Christie Matrix SIM WQ and fully adjustable in 1 percent increments over a 0-100 percent range. This allows system designers and customers to maximize dynamic image quality over a range of applications and/or training scenarios.
Like all Christie Matrix series projection systems, the Christie Matrix StIM WQ and Christie Matrix SIM WQ are integrated, scalable environment projection systems purpose-built for simulation applications. Complete system solutions built on Christie Matrix StIM WQ and Christie Matrix SIM WQ along with Christie AutoCal, directly translates to the highest levels of performance combined with extremely low sustainment cost and maximum life span.
“The introduction of the Christie Matrix StIM WQ and Christie Matrix SIM WQ represents a major leap in technological capabilities in simulation and training that strongly reaffirms Christie´s commitment to the industry,” said Zoran Veselic, vice president of Visual Environments, Christie. “Solid state projection technology is rapidly evolving, driven by customers´ increasing expectations for higher resolution and higher brightness from LED projectors. The Christie Matrix StIM WQ and Christie Matrix SIM WQ further strengthen our innovation leadership in simulation and training.”
Christie Matrix StIM WQ — “Star” of the Night Sky
The unique, dual input architecture of the Matrix StIM WQ makes it the only WQXGA simulation projection system available today that displays separate channels for visible light and Infra-Red (IR) spectrum for stimulated Night Vision Goggles (NVG) training through Christie InfraScene. With the ability to separate RGB and IR channel management, the Matrix StIM WQ offers greater system design flexibility, enabling the user to tailor and optimize the system to meet the specific night training requirement. Another advantage of the Matrix StIM WQ´s dual input architecture is the ability to composite the two 60Hz RGB inputs to deliver true 120Hz RGB operation. When used with Christie AccuFrame smear reduction technology, the result is dramatically improved image quality without image artifacts or perceived loss of brightness while maintaining compatibility with current Image Generator technology, and without the need to make changes to the visual database.
Designed for 24/7 operation and with a platform rated at 50,000 hours Mean Time Between Failures (MTBF), the Christie Matrix StIM WQ´s rugged design for motion platform use is a durable projection system with no consumables and virtually maintenance-free.
Christie Matrix SIM WQ — A “High Flyer” in Commercial Flight Simulation
The Christie Matrix SIM WQ goes beyond FAA Level D compliance for projectors in Full Flight Simulators with its higher resolution and color matching technology. Solid state, LED-based illumination means reliable, 24/7 operation, with lower power consumption and an extremely low sustainment cost that translates to a low total cost of ownership. Its inherently stable long-life platform doesn´t fade over time due to its unique, lamp-less illumination systems that offer unprecedented stability and reliability, with no consumables for reliable, continuous operation.
“The Christie Matrix StIM WQ and Matrix SIM WQ will dramatically expand training options for a wide range of simulation programs,” said Veselic. “They are compatible with all simulation motion environments, can be mounted in either landscape or portrait mode and, with Christie AutoCal, they provide real-time continuous calibration to ensure consistent luminance and color across the entire projection array, and minimum time for system set-up and re-calibration. They are at the true ℠front line´ of simulation technology, offering performance, value and versatility to meet the most demanding needs of the industry.”
Visit Christie at booth #2549 at I/ITSEC.
Christie Digital Systems USA, Inc. a wholly-owned subsidiary of Ushio Inc., Japan, designs, builds and installs customized projection display solutions. Christie delivers turn-key solutions for sophisticated virtual reality, simulation systems and control room environments including high-resolution power walls, multi-sided immersive environments, curved screen displays, domed simulation and multi-projector arrays. Industries and organizations that rely on Christie range from government agencies to oil and gas, aerospace to entertainment, and manufacturing and design to pharmaceuticals. For more information, visit http://www.christiedigital.com.
Carmen Robert (at I/ITSEC)
Herman & Almonte PR
212-616-1190, ext. 267
“Christie” is a trademark of Christie Digital Systems USA, Inc., registered in the United States of America and certain other countries. DLP® is a registered trademark of Texas Instruments Inc.
For the original version on PRWeb visit: http://www.prweb.com/releases/prweb2012/12/prweb10202054.htm