Larson Electronics Releases Flange Mounted Class 1 Division 2 LED Light
KEMP, Texas, March 22, 2013 /PRNewswire/ — Larson Electronics Magnalight announced the addition of a Class 1 Division 2 linear flange mounted LED for hazardous location area use. The HAL-24-2L-LED-FLGM is a two foot, 2 lamp LED fixture with a flange style mounting bracket the wiring hubs can be connected above the mounting surface while the lens and bulb access is available below the mounting surface.
Larson Electronics announced the release of the HAL-24-2L-LED-FLGM LED light for Class 1 Division 2 areas. A one inch flange around this hazardous location lighting fixture enables operators to install the light in a ‘cut-out’ on a mounting surface. This enables operators to lower the profile of the fixture to less than 3 inches, since the bulk of the fixture, including the wiring hubs is outside the mounting surface. Operators looking to maximize the usable space within a booth or enclosure will benefit from this flange mounted LED light. The flange mount preserves the ability for the operators to change the lamps and access the fixture from within the enclosure for easy maintenance.
“By offering a flange mount on our popular HAL-24-2L-LED Class 1 Division 2 LED light, we are giving operators the ability to preserve working space, since the bulk of the fixture is above the ceiling or outside the wall,” said Rob Bresnahan with LarsonElectronics.com.
Larson Electronics Magnalight produces a wide range of LED lighting for Class 1 Division 1 and Class 1 Division 2 areas. You can learn more about our hazardous area lighting by visiting LarsonElectronics.com or contacting 1-800-369-6671 (1-903-498-3353 international) or email@example.com.
Larson Electronics LLC www.Magnalight.com 9419 E US HWY 175, Kemp, TX 75143 -P: (800) 369-6671 -F: (903) 498-3364 - E: firstname.lastname@example.org
SOURCE Larson Electronics