Quantcast

Larson Electronics Announces Release of 120 Watt 365NM Ultraviolet LED Light for UV Curing Applications

May 9, 2013

Larson Electronics announced the release of the LEDLB-24E-UV-365NM ultraviolet LED light for curing applications. This compact UV light is designed to provide operators a cost effective alternative to 400 watt UV bulbs used for curing coatings and primer.

Kemp, Texas (PRWEB) May 08, 2013

The LEDLB-24E-UV-365NM ultraviolet LED light bar from Larson Electronics´ Magnalight.com is an extremely durable and powerful alternative to the bulky, heat producing 400 watt ultraviolet lamps currently used by most operators in UV curing operations. Combining high intensity with extreme durability, this IP68 rated UV LED light bar is waterproof to three meters and produces a powerful ultraviolet light beam with a peak of 365 nanometer wavelength. This ultraviolet emitter features twenty-four five watt UV LED emitters producing 12.5 mW/cm2 each when measured at 12”, and are paired with high purity optics to produce a wide spreading flood beam or a tightly focused spot beam. The LEDLB-24E-UV-365NM is capable of effectively curing objects as its 400 watt metal halide counterpart, without producing heat and a third of the amp draw.

These light bars operate on low voltage direct current and can utilize voltages ranging from 9 to 48VDC without the need for a transformer, making them ideal for use with vehicles and automotive batteries that commonly provide 12 or 24 volt DC power. This provides operators with the ability to configure cordless paint curing systems. Alternatively, Larson Electronics provides AC to DC transformers, enabling operators to power this light from any 120-277V AC power source. The housings are constructed of extruded aluminum, and an unbreakable polycarbonate lens gives these light bars unparalleled durability and the strength to withstand rugged use that would destroy typical gas burning lamps. These ultraviolet lights have a 50,000 hour operational life and are an ideal upgrade for fragile and heat producing 400 watt ultraviolet lamps.

“The LEDLB-24E-UV-365NM ultraviolet LED curing light is a direct replacement for traditional 400 watt UV curing lamps,” said Robert Bresnahan of Larson Electronics´ Magnalight.com. “This UV light can be used with vehicle body repair, tank coatings, aerospace, powder coating, and any applications that utilize ultraviolet curable products. The beauty of this compact ultraviolet emitted is it produces no heat, resulting in longer exposure times without risking overheating from the lamps. Combined with a 50,000 hour life span and no warm-up times, this ultraviolet LED light is a must have for all curing applications.”

Larson Electronics manufactures a wide variety of ultraviolet lights and for curing and non-destructive testing applications. You can learn more about Larson Electronics at Magnalight.com or contact 1-800-369-6671 (1-903-498-3363) for more information.

For the original version on PRWeb visit: http://www.prweb.com/releases/prweblarsonelectronics/ultravioletledcuringlight/prweb10713576.htm


Source: prweb



comments powered by Disqus