Pexheat Announces the Watts Radiant R-flex Tubing System
Florida's Pexheat Announces Large Diameter Highly Flexible Insulated PEX Tubing
North Port, Florida (PRWEB) September 04, 2013
Pexheat is proud to announce the release of the R-flex Insulated Tubing System by Watts Radiant. The art of simplicity.
If you have ever tried to bury a run of supply tubing underground, you have come up with the dilemma of how to keep from losing all the heat carried by that pipe. Many of us just used a piece of drainage pipe as a piece of conduit to keep the dirt and moisture off the pipe and hoped for the best. Unfortunately if that pipe was bringing heat in from a Wood Boiler or running between two buildings, that supply piping lost a lot of heat into the ground. It was also quite tough to snake a piece of 2 in. PEX through a corrugated drainage pipe.
The R-Flex system can be used for hydronic heating, hydronic snow melting, district heating, commercial and process piping, geothermal, agricultural piping, biomass heat sources, wood-fired boilers, solar, cooling towers, chilled water systems and much, much more!
Watts Radiant has made the job of buried supply piping fast and easy. With the release of the R-flex Insulated Tubing System, the installer has maximum flexibility in his pipe, superior insulation ability with several layers of cross-linked polyethylene foam, exceptionally high durability with a double walled outer casing, lighter weight than rigid piping systems and easy installation with the R-flex compression fittings, caps and sleeves.
The R-flex system is very easy to install with shrink caps for terminal installations, waterproof elbows, tees and inspection chambers for secure reliable underground connections. It also includes a full line of compression fittings for reliable connections without an expensive crimping tool.
R-flex pre-insulated piping comes in single and double (supply and return) tubing runs. It also comes in 1 in., 1.5 in., 2 in., 2.5 in., 3 in., 3.5 in. and 4 in. sizes. You can purchase in pre-cut lengths or bulk coils. Contact them to find out how to use R-flex Insulated Pipe on your next job.
About Pexheat: Providing radiant floor heating solutions and plumbing supplies to professional contractors, homeowners and the do-it-yourselfer, Pexheat is a full service floor heating design and sales company based in North Port, Florida. With their expert design staff and flexible designs, they are radiant done right.
For the original version on PRWeb visit: http://www.prweb.com/releases/2013/9/prweb11071342.htm