Nex Flow™ Air Products Introduces Distribution Manifolds For Air Nozzles and Air Jets
Nex Flow™ Manifolds are a convenient way to mount rows of multiple nozzles, air jets and other small blow off products to dry, clean or cool wider surfaces.
Toronto, Ontario (PRWEB) January 14, 2014
Nex Flow™ Manifolds are a convenient way to mount rows of multiple nozzles, air jets and other small blow off products to dry, clean or cool wider surfaces. Come complete with mounting holes.
All Nex Flow™ Manifolds are available with air inlet connections at the ends and rear. For smaller air flows, you may use one end connection or rear connection. For larger flows, you need to utilize the two end connections.
Two basic Nex Flow™ Manifold sizes are available with three versions for each: Two (2) outlet unit, Four (4) outlet unit and Six (6) outlet unit. There is the Standard Flow Size and for high flows, the High Flow Size for each version.
A flow guide is provided for each version and size. Manifolds may be held in place with the compressed air piping or by using the mounting holes on the units.
MANIFOLD SYSTEM FEATURES
. Comes in three sizes
. Easy to use and install
. Flexible in use – multiple air inlets
MANIFOLD SYSTEM BENEFITS
. Allows to easily apply nozzles, jets or other blow off products in rows
. Saves time in installation
Nex Flow™ blow off products are a simple way to reduce compressed air cost at the point of use. Energy reduction can be anywhere from 20% to 90% depending on the product and application. In addition noise levels can be reduced 3 dBA or much more, again depending on the product and application.
Nex Flow™ Manifolds provide the extra assistance for mounting and use to save energy and improve your manufacturing environment.
For the original version on PRWeb visit: http://www.prweb.com/releases/2014/01/prweb11483573.htm