Larson Electronics Reveals a Portable Explosion Proof LED Light on a Base Stand
Industrial lighting leader Larson Electronics has announced the release of a Class 1 Division 1 and Class 2 Division 1 & 2 Portable Explosion Proof LED Light mounted on a base stand fabricated from non-sparking aluminum. The compact LED light head on this unit produces 5,800 lumens of light while drawing only 70 watts.
Kemp, Texas (PRWEB) February 14, 2014
The EPL-LPBS-1X70LED-100 portable explosion proof LED light provides operators an easy to maneuver LED work light for use within hazardous locations. This portable fixture is comprised of a 70 watt low profile LED light head that is mounted atop of a base stand that is fabricated from non-sparking aluminum. The LED light head produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flammable vapors, gases and dusts may be present. The LED lamp head is T5 temperature rated and retains 70% of its lumen output after 100,000 hours of use.
The lamp can be easily adjusted up or down 90° and locked into position by loosening the two hand screws located on the side of the light head. Once the light is in the desired position, the operator then tightens the screws back to set the position. The light frame assembly features a carrying handle on the top for easy transport and a hand screw at the base allowing operators to pivot the top frame assembly on the four leg base stand. Included with this portable LED light is 100 feet SOOW cord terminated in a 1523 explosion proof straight blade plug. This unit is multi-voltage capable and can be configured to operate on 120-277 volts AC. For added protection to the lens, it is shipped with 25 peel off mylar over-spray lamp protectors. The protectors provide the lamp protection from dirt or debris and can be removed, cleaned and replaced.
“Operators can easily move this LED light from one location to another without the hassle of the cumbersome setup of light towers or string lights,” Rob Bresnahan with Larsonelectronics.com said. “This explosion proof LED light is lightweight, versatile and maintenance free.”
Larson Electronics carries and extensive line of LED lights, LED boat lights, hazardous location lights, intrinsically safe LED lights, LED blasting lights and explosion proof lights. You can view Larson Electronics’ full line of industrial grade lighting by visiting their website at Larsonelectronics.com. Larson Electronics can be reached directly by calling 1-800-369-6671 or 1-903-498-6636 for international inquiries.
For the original version on PRWeb visit: http://www.prweb.com/releases/larsonelectronics/explosionproofledlight/prweb11521416.htm