Quantcast

Test Equipment Plus Announces the Signal Hound BB60A Real-time Spectrum Analyzer with Excellent Performance for Under $2,500

March 5, 2014

Real-time without the high cost

LA CENTER, Wash., March 5, 2014 /PRNewswire/ –Test Equipment Plus today announced the Signal Hound BB60A, a real-time spectrum analyzer and RF recorder designed to capture and display RF events as short as 1 us. The BB60A is a small, lightweight, and affordable USB-based real-time RF spectrum analyzer that operates from 9 kHz to 6 GHz and can go anywhere. It can also be customized to perform complex, remote, and/or automated functions.

http://photos.prnewswire.com/prnvar/20140227/SF73866LOGO

“The proliferation of wireless devices has led to unsustainable growth in the way we use the RF spectrum. Interference problems occur with increasing regularity. Interference hunting and real time spectrum monitoring tools have become a necessity. The problem is finding a real-time spectrum analyzer that is adequate for the task and isn’t cost prohibitive. Also, adding RF recording capability to a traditional spectrum analyzer is avoided due to added cost. Advances in commercial off-the-shelf (COTS) components, coupled with superb engineering, made it possible for us to offer the Signal Hound BB60A. It provides a high value/low price real-time RF spectrum analyzer with RF recorder capability,” said Bruce Devine, CEO, Test Equipment Plus.

About the BB60A Real-time Spectrum Analyzer
The BB60A real-time RF spectrum analyzer is the first to market with an RF recorder that uses the USB 3.0 data pipe. USB 3.0 streams at twice the data rate of a 1GiE connection. In order to achieve this functionality, three things were necessary. First, computer processors and video card performance had to advance to the point where GPU acceleration of the spectrum analyzer graphics became inexpensive to implement. Second, the availability of inexpensive high performance SSDs (Solid State Drives) was required so that broadband RF recording to the PC could be achieved without a costly and bulky RAID-0 or RAID-5 hard drive configuration. And third, the Cypress FX3 chip, which was the first USB 3.0 device controller to market, was needed for Signal Hound to cost-effectively create the large 140 MB/s data pipe from the BB60A to the PC.

The BB60A streams 80 million samples per second of RF data to a PC via USB 3.0, enabling real-time spectrum analysis of any 20 MHz segment of spectrum. Users are able to visualize spectral events as short as 1 us with 100% POI (probability of intercept) within a 20 MHz instantaneous bandwidth.

This BB60A comes with a compiled API (Application Programming Interface) for writing custom software. The open source spectrum analyzer software provides excellent examples of techniques for interfacing the API when writing customized applications.

Availability
The Signal Hound BB60A is in stock, ready for immediate shipment. The BB60A sells for $2,479 USD. Price will vary outside USA due to distributor cost of shipping, import taxes, and currency fluctuations.

About Signal Hound
The Signal Hound spectrum analyzers are compact and simple to use. The Signal Hound BB60A is used for real-time spectrum monitoring, manufacturing process control, interference hunting, spread spectrum signal analysis, capturing intermittent events, and general purpose spectrum analysis.

Industry is using the spectrum analyzers for process monitoring and embedding them in specialty products. Government is using them for spectrum monitoring. Electronic repair technicians, engineering students, ham radio enthusiasts, and electronics hobbyists are also finding them useful. Although they are small and affordable, they have the sensitivity, accuracy, and dynamic range expected from expensive and bulky test equipment.

For more information, contact sales@signalhound.com or call 1-800-260-TEST. Outside of the United States, please visit our website at www.signalhound.com to find the nearest distributor.

About Test Equipment Plus
Test Equipment Plus provides world class component-level repair service of HP® / Agilent® spectrum analyzers, network analyzers, and signal generators. They also design, manufacture, and market the Signal Hound line of spectrum analyzers and tracking generators. For HP® / Agilent® repairs contact: service@teplus.com or call +1 (360) 263-5006.

    For more information, contact:

    Debra Seifert Communications LLC Test Equipment Plus, Inc.

    Debra L. Seifert                 Bruce Devine

    +1 (503) 626-7539 (USA)                        +1 (360) 263-5006 (USA)

    debra@debraseifert.com           bruce@teplus.com

Logo – http://photos.prnewswire.com/prnh/20140227/SF73866LOGO

SOURCE Test Equipment Plus


Source: PR Newswire



comments powered by Disqus