Quantcast

US Coated Fabrics Market to Reach 725 million square yards by 2018 Says a New Research Report at ReportsnReports.com

July 19, 2014

ReportsnReports.com adds latest report on “Coated Fabrics to 2018” to its store.

Dallas, TX (PRWEB) July 19, 2014

US Demand to Rise 3.8% Annually Through 2018

Demand for coated fabrics in the US is projected to advance 3.8 percent per year to 725 million square yards in 2018, an acceleration from sluggish gains posted during the 2008 to 2013 period. Rebounding construction expenditures will provide opportunities for coated fabrics used in products that are closely tied to building activity, such as wall coverings, furniture, and awnings and canopies. In value terms, demand for coated fabrics is forecast to increase five percent per year to $4 billion in 2018, benefiting from an acceleration in area demand, as well as moderate price increases. However, pricing gains will be limited due to increased competition from lower cost imports.

Key Motor Vehicle Market to See Accelerating Growth

The largest market for coated fabrics in 2013 was motor vehicles, with 30 percent of the total benefiting from the large number of light vehicles that are produced in the US each year. Going forward, growth will accelerate from a high 2013 base that reflects a recovery in vehicle production. Still, advances will be propelled by the increased incorporation of polyvinyl-coated and polyurethane coated fabrics in upholstery and interior trim in light vehicles. In these applications, coated fabrics are aided by continued improvements in appearance and feel, placing further competitive pressures on alternative materials. Gains will also be promoted by a higher number of airbags per light truck and van through the forecast period. Silicone-coated fabrics are typically used in the manufacture of airbags.

Complete report is available at http://www.reportsnreports.com/reports/292269-coated-fabrics-to-2018.html .

Coated Polyester to Continue as Leading Substrate

Coated fabrics are categorized based on the substrate or coating used. Versions with polyester substrates accounted for approximately 45 percent of total US coated fabric demand in 2013. These substrates are valued for their versatility at a relatively low cost. While used in a variety of markets, three markets (motor vehicles, industrial, and furniture) account for approximately half of coated polyester sales. Above-average gains in the furniture market will provide opportunities. In addition, demand for coated polyester will benefit from its use in other above-average growth markets, such as wall coverings, and awnings and canopies.

Polymer-Coated Fabrics to Remain Dominant Product

Polymer-coated fabrics dominated coated fabric demand in 2013, and will continue to do so through 2018. Within this category, vinyl-coated fabrics account for the largest share 40 percent of demand. Going forward, vinyl-coated fabrics will retain their significant position due to their adequate performance characteristics provided at a relatively low cost. Among the major types of polymer coated fabrics, polyurethane-coated fabrics are expected to post the fastest gains through 2018. Improvements in polyurethane coatings, particularly in their appearance and feel when cured, will boast opportunities. The rubber coated fabrics product category is much smaller, but growth will benefit from the usage of silicone varieties in the large market for airbags. Advances will be fastest for fabric-backed wall coverings, which will recover in line with the rebound in the building construction sector, especially in the institutional and office segments where these wall coverings find significant use.

Purchase a copy of this report at http://www.reportsnreports.com/purchase.aspx?name=292269 .

Company Profiles

Profiles for 33 US industry players including Canadian General-Tower, OMNOVA Solutions, Saint-Gobain, Spradling, Takata & Trelleborg.

Additional Information

This study covers the US coated fabric industry, defined here to include fabrics coated or laminated with polymeric or elastomeric coatings or films. Historical data are provided for 2003, 2008, and 2013, with forecasts provided for 2018 and 2023. Data are provided at the coated fabric manufacturer level. Coated fabric demand and shipments are presented in current dollars by type of product (e.g., vinyl-coated, polyethylene-coated, polytetrafluoroethylene coated, polypropylene-coated, acrylic-coated, polyurethane-coated, other polymer-coated, rubber-coated, and fabric-backed wall coverings). Demand is also presented in square yards for coated fabrics by substrate (e.g., polyester, nylon, cotton, and others) and by market (e.g., motor vehicles, marine and other non-motor vehicle transportation, protective clothing, furniture, industrial, wall coverings, books, commercial and rental tents, awnings and canopies, and others). The entire study is framed within the overall industry’s economic and market environment. Fabrics treated with chemical finishes, such as SCOTCHGARD (3M) or other stain- or water-repellent finishes, are not coated fabrics as defined here and are therefore not included.

Browse more reports on Advanced Materials Market http://www.reportsnreports.com/market-research/advanced-material/ .

Contact sales at reportsandreports.com for further information.

About Us:

ReportsnReports.com (http://www.reportsnreports.com/) is an online database of market research reports offers in-depth analysis of over 5000 market segments. The library has syndicated reports by leading market research publishers across the globe, and also offers customized market research reports for multiple industries.

For the original version on PRWeb visit: http://www.prweb.com/releases/us-coated-fabrics-market/2018-forecasts-report/prweb12029177.htm


Source: prweb



comments powered by Disqus