Quantcast

HP Cuts Costs, Triples Data Center Capacity With New Energy-Efficiency Technologies, Services

November 3, 2008

HP (NYSE:HPQ) today broadened its Green Business Technology initiative with additions to its HP Thermal Logic portfolio that include power-capping server technologies and energy-efficiency services designed to reduce costs and extend the life of data centers.

In traditional data centers, customers invest millions in capital expenditures to create a redundant power infrastructure that maximizes uptime. Additionally, to ensure power availability, IT administrators overprovision server energy.

HP Dynamic Power Capping (http://www.hp.com/go/dynamicpowercapping) helps customers reallocate power and cooling resources in the data center by dynamically setting or “capping” the power drawn by the servers. This eliminates the need for overprovisioning by precisely identifying how much power is actually required to run each server and setting a limit based on that usage. As a result, companies reclaim their overprovisioned energy to improve the capacity of their data center.

To expand the data center, companies can increase the number of servers threefold, using the same power allocation and infrastructure. This allows them to recover up to $16 million in capital expenditures for a 1-megawatt data center.(1) At the same time, it can also reduce ongoing energy consumption by up to 25 percent and save nearly $300,000 a year.(2)

“With these new solutions from HP, customers are able to drive down data center costs by reducing energy consumption and, at the same time, minimize environmental impact,” said Peter Gross, chief executive officer, EYP Mission Critical Facilities, an HP company. “HP’s Green Business Technology initiative is built on decades of innovation and experience in data center design and deployment, resulting in solutions that empower CIOs to turn energy efficiency into business benefits that impact the bottom line.”

Better use of power and cooling resources

HP Thermal Logic (http://www.hp.com/go/thermallogic) is a set of technologies embedded in HP products and services to deliver a more efficient data center. It combines measurement and control of power and cooling resources with industry-leading, energy-efficient product and solution design.

HP Dynamic Power Capping (http://www.hp.com/go/dynamicpowercapping), part of the HP Thermal Logic portfolio, is the industry’s first solution to offer a threefold increase in data center capacity. This is accomplished with hardware-based control of system power, which places a limit on, or “caps,” the power that is used by the equipment without compromising performance. Additionally, HP Insight Control Environment software provides accurate measurement of power consumption, allowing administrators to gain insight into actual power and cooling usage via thermal dashboards.

Minimize environmental impact

HP has been committed to sustainable IT within the data center since the early 1990s. HP research and development teams continue to solve energy problems using sophisticated modeling to better provision cooling resources, allocate computing workloads and reclaim power capacity in constrained data centers. As a result, the company is introducing new HP Energy Efficiency Design and Analysis Services to address data center energy challenges:

— Energy Efficiency Analysis offers a comprehensive assessment of a data center using HP’s proprietary return on investment modeling tool. It provides scenarios and cost benefits along with detailed plans for energy-efficiency improvements, investment payback and facility reliability.

— Energy Efficiency Design provides designs for new buildings or retro-commissioning existing facilities for compliance with worldwide environmentally accredited standards, such as Leadership in Energy and Environmental Design (LEED) and the Building Research Establishment’s Environmental Assessment Method (BREEAM). HP also uses its expertise in high-density cooling, critical power and energy reduction design to create facilities that meet the specific business requirements of customers.

Reduce energy consumption

HP system practices and product design are key drivers to achieving data center energy and cost savings as well as business growth:

— The HP ProLiant BL460c G5 Server Blade has been completely redesigned to maximize energy efficiency and optimized for power-constrained environments. This server uses 44 fewer watts per blade, saving more than 700 watts per enclosure compared to its predecessor – up to a 25 percent energy-efficiency improvement. (2)

— HP is among the first companies working with the U.S. Environmental Protection Agency (EPA) to qualify servers with an ENERGY STAR(R) rating. New HP ProLiant (http://www.hp.com/go/proliant) and BladeSystem (http://www.hp.com/go/bladesystem) servers are expected to meet or exceed ENERGY STAR standards by early 2009.

— The HP BladeSystem c7000 Enclosure has been enhanced with a new HP 24000W High Efficiency Hot-Plug Power Supply. This provides higher efficiency than existing power supply units and also reduces losses at low loads by placing half the power supply in standby.

More information about these new offerings and the HP Green Business Technology Initiative is available at www.hp.com/go/greencomputing.

About HP

HP, the world’s largest technology company, provides printing and personal computing products and IT services, software and solutions that simplify the technology experience for consumers and businesses. HP completed its acquisition of EDS on Aug. 26, 2008. More information about HP is available at http://www.hp.com/.

Note to editors: More news from HP, including links to RSS feeds, is available at http://www.hp.com/hpinfo/newsroom/.

(1) Uptime Institute, “Cost Model: Dollars per kilo watt plus Dollars per Square Foot of Computer Floor,” W. Pitt Turner IV, P.E. with Kenneth G. Brill, 2008.

(2) HP Performance Engineering Team, 2008 research.

ENERGY STAR is a U.S. registered mark of the United States Environmental Protection Agency.

This news release contains forward-looking statements that involve risks, uncertainties and assumptions. If such risks or uncertainties materialize or such assumptions prove incorrect, the results of HP and its consolidated subsidiaries could differ materially from those expressed or implied by such forward-looking statements and assumptions. All statements other than statements of historical fact are statements that could be deemed forward-looking statements, including but not limited to statements of the plans, strategies and objectives of management for future operations; any statements concerning expected development, performance or market share relating to products and services; anticipated operational and financial results; any statements of expectation or belief; and any statements of assumptions underlying any of the foregoing. Risks, uncertainties and assumptions include the execution and performance of contracts by HP and its customers, suppliers and partners; the achievement of expected results; and other risks that are described in HP’s Quarterly Report on Form 10-Q for the fiscal quarter ended July 31, 2008 and HP’s other filings with the Securities and Exchange Commission, including but not limited to HP’s Annual Report on Form 10-K for the fiscal year ended October 31, 2007. HP assumes no obligation and does not intend to update these forward-looking statements.

(C) 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.




comments powered by Disqus