Quantcast

Aries Electronics Patented CSP/BallNest Hybrid Socket Provides Reliable, Consistent Test and Burn-in Down to 0.30 mm Pitch

January 7, 2009

BRISTOL, Pa., Jan. 7 /PRNewswire/ — Aries Electronics, an international manufacturer of standard, programmed and custom interconnection products, today announced its new patented CSP/BallNest Hybrid Socket suitable for prototyping, test or burn-in of CSP (chip scale package), BGA (ball grid array), microBGA and LGA (land grid array) devices. The socket, which features a lid that nests each ball termination into the socket for a reliable connection, can be used on any device with a 0.30 mm pitch or larger.

The ZIF-style (zero insertion force) socket uses Aries solderless, gold-plated pressure mount spring probes, allowing for easy mounting and removal from the PCB (printed circuit board). The design maintains constant force throughout the entire test and burn-in cycle as well as on the surface mount PCB when no chip is engaged.

The socket solders down onto the target PCB in the same footprint as the socketed device. This process also enables the socket to be mounted to an adapter board terminated with male thru-pins effectively creating a thru-hole solder tail socket for BGA devices. The socket cover can also incorporate heat sinks for added test and burn-in flexibility.

A four-point crown ensures “scrub” on solder oxides. The gold-over-nickel plated compression spring probes leave very small witness marks on the bottom surface of the device solder balls, further increasing reliability.

With a signal path of only 0.077 inches (1.96 mm), Aries’ new socket provides minimal signal loss for higher bandwidth capability. Special lid designs and materials are available upon request.

The compression spring probes in the Aries CSP/BallNest hybrid sockets are constructed from heat-treated beryllium-copper with 30 micron inches min (0.75 micron mm) gold per Mil-G-45204 over 30 micron min (0.75 micron mm) minimum. The socket body is PEEK or Torlon, while screws and alignment pins are stainless steel and all inserts are tin-plated brass alloy per QQ-B-626.

The socket’s contact forces are 15 g per contact on a 0.30 mm to 0.35 mm pitch, 16 g per contact on a 0.40 mm to 0.45 mm pitch, 25 g per contact on a 0.50 mm to 0.75 mm pitch and 25 g per contact on a 0.80 mm pitch or larger. Operating temperature is -55 degrees Celsius to 150 degrees Celsius (-67 degrees Fahrenheit to 302 degrees Fahrenheit) and estimated contact life is 500,000 cycles.

As with all Aries sockets, the new test socket is available in custom materials, platings, sizes and configurations to suit specific customer applications.

A BallNest socket for a typical 50 lead BGA device with 0.3 mm pitch is $500 each at quantity 2 pieces. Delivery is 5 – 6 weeks ARO.

For additional information, contact Aries Electronics Inc., 2609 Bartram Road, Bristol, Pa. 19007-6810; Tel: 215-781-9956; Fax: 215-781-9845; Email: info@arieselec.com; Web: www.arieselec.com, Data sheet #23016–www.arieselec.com/Web_Data_Sheets/23016/23016.htm;

Europe Email: europe@arieselec.com.

For an electronic copy, please visit www.simongroup.com/PressRoom/WordDocs/ari/ARI-A-7399.doc

For high res photo, please visit

www.simongroup.com/PressRoom/Images/aries/ARI-A-7399.jpg

For additional news releases from Aries Electronics, please visit www.simongroup.com/PressRoom/aries.html

Subscribe to Aries’ RSS feed. http://feeds.feedburner.com/PressRoom-Aries

SOURCE Aries Electronics


Source: newswire



comments powered by Disqus