July 22, 2010
Researchers Simplify Process To Make World’s Tiniest Wires
Surface tension isn't a very powerful force, but it matters for small things "” water bugs, paint, and, it turns out, nanowires.
Nanowires are so tiny that a human hair would dwarf them "” some have diameters 150 billionths of a meter. Because of their small size, surface tension that occurs during the manufacturing process pulls them together, limiting their usefulness. This is a problem because the wires are seen as a potential core element of new and more powerful microelectronics, solar cells, batteries and medical tools.But in a paper in the journal ACS Applied Materials & Interfaces now online, a University of Florida engineering researcher says he has found an inexpensive solution.
Kirk Ziegler, an assistant professor of chemical engineering, said nanowires are most often made today with a process that involves the immersion of the wires.
When complete, each wire is supposed to poke up right next to the other from a flat surface, like bristles on a Lilliputian toothbrush. But Ziegler said the wires are so tiny and so flexible that surface tension clumps them up when dried.
Manufacturers use extremely high pressure to reduce the surface tension, but Ziegler said that process is difficult, expensive and not conducive to large-scale production.
Ziegler and Justin Hill, who will graduate from UF with a doctorate in chemical engineering this summer, realized that they needed to introduce a force that counteracted that of the surface tension. They came up with a process simple enough to be achievable with a nine-volt battery. The researchers apply an electrical charge to the nanostructures during the manufacturing process, charging each tiny wire and making it repel its neighbor.
"As the two nanowires pull toward each other because of the surface tension, the like charges at the tips act to push them apart," Ziegler said. "The aim is to get a net zero force on the structure, so the nanowires stand straight."
Tests of microscope-slide-sized surfaces, each containing trillions of nanowires, showed that the procedure effectively prevents clumping, Ziegler said.
Nanowires have not found wide commercial applications to date, but Ziegler said that as engineers learn how to make and manipulate them, they could underpin far more efficient solar cells and batteries because they provide more surface area and better electrical properties.
"Being able to pack in a higher density of nanowires gives you a much higher surface area, so you start to generate higher energy density," he said.
Ziegler said that biomedical engineers are also interested in using the wires to help deliver drugs to individual cells, or to hinder or encourage individual cell growth. The University of Florida has applied for a patent on the process, he added.
By Aaron Hoover, University of Florida
Image 1: Clumps of extremely tiny nanowires in this image are captured with the aid of an electron microscope. The clumping pattern, which occurs as a result of surface tension during the manufacturing process, limits the usefulness of the wires, which are viewed as a likely core element of more powerful microelectronics, solar cells, batteries and medical tools. Credit: University of Florida
Image 2: In this image captured with the aid of an electron microscope, nanowires stand straight up as a result of a new process developed by University of Florida chemical engineering researchers. The engineers apply an electrical charge to the nanostructure during the manufacturing process, charging each wire and making it repel its neighbor, counteracting the opposite force induced by the surface tension. The researchers say the process is inexpensive and simple, a step toward making the nanowires a more common constituent of electronics, medical devices and solar cells. Credit: University of Florida
On the Net: