Quantcast
Too Hot And Too Cold Is Just Right Goldilocks Principle

Too Hot And Too Cold Is Just Right: Goldilocks Principle Wrong For Particle Assembly

Provided by James Devitt, New York University Microscopic particles that bind under low temperatures will melt as temperatures rise to moderate levels, but re-connect under hotter conditions, a team of New York University scientists has found....

Latest 3D printing Stories

2014-10-23 23:11:52

Artist Kevin Caron's ground-breaking 36-inch-tall sculpture Simple Planes With Aquamarine Stripe recently debuted at the art show “Materialize: 3D Printing & Rapid Prototyping” at Phoenix’s historic Shemer Art Center. The sculpture was created using one of the largest 3D printers available for the consumer market, according to its manufacturer, Cerberus 3D. Phoenix, Arizona (PRWEB) October 23, 2014 After some suspicion and caution, artists are now openly embracing 3D...

2014-10-23 08:42:39

SAN JOSE, Calif., Oct. 23, 2014 /PRNewswire/ -- FlexTech Alliance announced today the awarding of a development agreement to nScrypt and NovaCentrix for a next-generation three-dimensional (3D) printing tool for creating complex and functional objects. The total award of $1,291,000 will be cost-shared between the organizations over a 12 month period. FlexTech partners with the U.S. Army Research Laboratory, which has a keen interest in 3D printing for rapid prototyping of new...

2014-10-22 12:32:28

Enhanced materials bring new capabilities to the high-performance Form 1+ Desktop SLA 3D Printer SOMERVILLE, Mass., Oct. 22, 2014 /PRNewswire/ -- Formlabs, the makers of the Form 1+ SLA 3D Printer, announced a new family of high-performance functional resins today. The new resins, Castable and Flexible, add capabilities to the Form 1+ 3D Printer, allowing for the investment casting of metal parts, as well as the printing of soft, impact-resistant models. Castable Resin is designed...

2014-10-22 08:40:16

Exclusive offer makes the lowest cost 3D printing virtually free for schools DUNLEER, Ireland, Oct. 22, 2014 /PRNewswire/ -- Mcor Technologies Ltd, manufacturer of the only line of desktop paper-based 3D printers in the world, announced today that US schools purchasing an Mcor IRIS 3D printer education package by December 15, 2014 will receive three years of unlimited free consumables for their paper-based 3D printer.* Mcor 3D printers offer the lowest operating cost of any 3D printer. They...

2014-10-21 23:06:33

New development in 3D printing keeps coming with new materials to print. Netherlands (PRWEB) October 21, 2014 Netherlands based Cyrus printers is mostly known for its printers. This Dutch startup has now released a whole range of new filament which is cheaper compared to the rest of the market while at the same time keeping the quality high. The process to make the new range of filament has taken some time to make it affordable to the public. "We all know quality prints depend on...

2014-10-21 16:31:21

DUBLIN, October 21, 2014 /PRNewswire/ -- Research and Markets ( http://www.researchandmarkets.com/research/kqxjz6/3d_printing) has announced the addition of the "3D Printing Market in Emerging Economies - China, India, UAE, Brazil, South Africa - Size, Share, Emerging Trends, Company Profiles, Demand, Insights, Analysis, Opportunities, Segmentation and Forecast," [http://www.researchandmarkets.com/research/kqxjz6/3d_printing ] report to their offering. (Logo:...

2014-10-21 08:42:52

MELBOURNE, Fla., Oct. 21, 2014 /PRNewswire/ -- iBox Printers announces the launch of the iBox Nano on crowd-funding site Kickstarter, a 3D Resin Printer that is the world's smallest, quietest, most affordable, and only battery powered 3D Resin Printer. Consumers will benefit from its portability, silent operation, and affordability while creating toys, jewelry, crafts and gifts; starting at $189. Photo - http://photos.prnewswire.com/prnh/20141020/153162 Photo -...

2014-10-21 08:23:24

The event is the only executive conference focused on Additive Manufacturing for the aerospace industry CHICAGO, Oct. 21, 2014 /PRNewswire/ -- Sciaky, Inc., a subsidiary of Phillips Service Industries (PSI) and leading providers of additive manufacturing solutions to the aerospace and defense industries, announced today that it will sponsor and chair the second annual Additive Aerospace Summit in Los Angeles, CA. The event is the only dedicated executive conference focused on...

2014-10-20 23:10:13

3DXTech has created two new grades of 3D Printing Filaments that incorporate multi-wall carbon nanotubes for ESD-safe applications in the semi-conductor fabrication and electronics market. These materials are ideal for 3D Printing components such as masks, jigs, fixtures, HDD components, connectors, and casings. 3DXNano™ ESD filaments exhibit excellent printability, consistent electrical properties, cleanliness, superior mechanical properties, and improved chemical resistance. Byron...

2014-10-20 20:25:52

Consumer & Industrial Applications, Technologies & Leading Companies LONDON, Oct. 20, 2014 /PRNewswire/ -- Report Details3D printing is more than merely a new technology; it heralds a wave of change to manufacturing processes across every major industry. Visiongain calculates that the 3D printing technologies market will reach $3.32bn in 2014. Although it took over two decades for the technology to rise to more widespread acclaim and prominence, 3D printing is now considered as...


Latest 3D printing Reference Libraries

The History of 3D Printing
2013-09-20 10:14:26

Three-dimensional printing, also known as additive manufacturing, is the process of using additives to form solid 3D objects of virtually any shape from a digital model. This is achieved using specially formulated additives, such as plastics, that are formed into successive layers of material typically laid down on a platform in different shapes. 3D printing is uniquely distinct from a more traditional 3D sculpting technique, which relies on the removal of layers (subtractive manufacturing)...

More Articles (1 articles) »
Word of the Day
ween
  • To think; to imagine; to fancy.
  • To be of opinion; have the notion; think; imagine; suppose.
The word 'ween' comes from Middle English wene, from Old English wēn, wēna ("hope, weening, expectation"), from Proto-Germanic *wēniz, *wēnōn (“hope, expectation”), from Proto-Indo-European *wen- (“to strive, love, want, reach, win”).
Related