Latest Cermet Stories

2008-12-16 10:05:00

SOUTHFIELD, Mich., Dec. 16 /PRNewswire/ -- Classic Car Collectors and Car Restoration Buffs are discovering a new way to restore and protect the engines of their classic automobiles, without the expense of engine teardown and without using replacement parts that can jeopardize the value of the car. CerMet(TM), an inexpensive nanotechnology product that is poured into an engine, manual transmission, or differential, provides the metal restoration and protection benefit of a ceramic coating...

2008-09-30 03:00:21

By Anonymous Cut Technologies Metal LLC's cermet-tipped circular saw blades are designed for cutting mild and stainless steels. The cermet- tipped blades, known as CTC-1000, CSM-1000, CSS-1000 and ColdCut- 1000, allow most metal to be cut faster and with less material lost to kerf. Their tooth material and design allow stainless steel and other hard materials to be cut with a finished edge. The cermet- tipped saw blades are said to work well with high-production cold saw machines, standard...

2008-07-26 03:00:29

By Zhang, L X Feng, J C; Liu, H B High frequency induction brazing of TiC cermets to steel using Ag- 54Cu-33Zn (wt-%) foil at 1073-1273 K for 30-300 s was investigated in the present paper. Both interfacial microstructure and mechanical properties of the brazed joints were studied. Microstructural analysis results show that the interface can be divided into three reaction layers and the formation products on the joint are Cu (SS) (where SS means solid solution), Ni^sub 3^ZnC^sub 0.7^ and Ag...

2008-06-24 15:03:03

Reportlinker.com announces that a new market research report related to the Components and Semiconductors industry is available in its catalogue. World Metal Matrix Composites Market http://www.reportlinker.com/p090584/World-Metal-Matrix-Composites-Market.html This report analyzes the worldwide markets for Metal Matrix Composites in US$ Million and Thousands of Pounds (lbs). The major product segments analyzed are Aluminum Matrix Composites, Nickel Matrix Composites, Refractory Metal...

Word of the Day
  • A murmuring sound; a rushing or whistling sound, like that of the wind; a deep sigh.
  • A gentle breeze; a waft; a breath.
  • Any rumor that engages general attention.
  • A cant or whining mode of speaking, especially in preaching or praying; the chant or recitative characteristic of the old Presbyterians in Scotland.
  • To make a rushing, whistling, or sighing sound; emit a hollow murmur; murmur or sigh like the wind.
  • To breathe in or as in sleep.
  • To utter in a whining or monotonous tone.
According to the OED, from the 16th century, this word is 'almost exclusively Scots and northern dialect until adopted in general literary use in the 19th.'