Quantcast

Latest Prototype Stories

2014-07-15 12:35:06

To Meet Increasing Market Demand for Rapid Prototyping Solutions SAN JOSE, Calif., July 15, 2014 /PRNewswire-iReach/ -- S2C Inc., a leading rapid SoC/ASIC prototyping solutions provider, today opened a new office, S2C Japan KK, in Shin-Yokohama, Japan, to better support its fast-growing customer base in the region. S2C Japan KK will provide sales and technical support as well as design services of hardware and software customization. S2C has appointed Tomoyuki Tsuji as the president of S2C...

2014-07-03 08:25:04

Acceleration of virtual prototype development, RTL verification and SoC software validation SAN JOSE, Calif., July 3, 2014 /PRNewswire-iReach/ -- S2C Inc., a leading SoC/ASIC rapid prototyping solutions provider, today announced that its ProtoBridge(TM) AXI now supports AXI-4 protocol with flexible bus width at an improved data transmission speed. Protobridge AXI is an FPGA-accelerated verification tool that enables designers to read and write data from computers to AXI-based designs mapped...

2014-06-23 08:35:21

New Program Provides Prototypers with Daughter Boards and Services from Synopsys-Approved Third Party Providers MOUNTAIN VIEW, Calif., June 23, 2014 /PRNewswire/ -- Highlights: -- HAPS Connect Program enables prototypers to leverage proven solutions from hardware and service vendors for fast prototype bring-up -- Network of approved third party hardware and service vendors provides daughter boards that are optimized for HAPS systems -- The initial partners of...

2014-06-01 23:00:57

Over the five years to 2019, industry demand and revenue are forecast to surge forward as 3D printing and rapid prototyping explodes in popularity and accessibility, especially in consumer markets. For these reasons, industry research firm IBISWorld has updated a report on the 3D Printing and Rapid Prototyping Services industry in its growing industry report collection. New York, NY (PRWEB) June 01, 2014 The 3D Printing and Rapid Prototyping Services industry has grown quickly in recent...

2014-05-27 23:03:05

Prototype boards for new radio product have been received. Salunga, PA (PRWEB) May 27, 2014 At the end of April 2014, prototypes for the new Cartell radio product were completed and delivered by Oven Industries. Located in Mechanicsburg, Pennsylvania, Oven Industries has formally contracted to make the radio line of future Cartell products. The prototypes, consisting of four circuit boards, boast a low current draw and an alleged long radio range. Two of the four boards contain a...

2014-05-27 12:35:34

CEDARBURG, Wis., May 27, 2014 /PRNewswire/ -- LS Research, a global leader in wireless product development, announces it has completed a 5,500 square foot expansion to its corporate facility in Cedarburg, WI. The expansion is highlighted by a state-of-the-art 5-meter EMC testing chamber, as well as an all-new product design prototyping laboratory. Photo - http://photos.prnewswire.com/prnh/20140520/89744 The 5-meter EMC testing chamber provides additional testing capabilities and...

2014-03-26 08:25:56

Better Software. Faster! Book Shares Best Practices from More Than 10 Contributing Companies across Key Market Segments MOUNTAIN VIEW, Calif., March 26, 2014 /PRNewswire/ -- Highlights: -- Includes case studies from mobile, consumer, industrial and automotive companies that are highly experienced using virtual prototypes for software development and hardware/software integration -- Provides 200 pages of practical guidelines on how virtual prototypes enable...

2014-03-25 23:28:44

Symbient's internal rapid-prototyping capabilities will allow PKC to reduce development time of the platform by 75% compared to industry standard practices. Vista, CA (PRWEB) March 25, 2014 Symbient Product Development has been selected by Pharmaco-Kinesis Corporation (PKC) to develop a compact, production-ready fluidic platform for their Metronomic Bio-Feedback Pump (MBP). The MBP is a development-stage implantable device that monitors and delivers metered quantities of chemotherapy...

2014-02-18 23:32:02

Protomatic, in Dexter, MI, has expanded its office space to accommodate entrepreneurs looking to take their concepts from idea to prototype to manufactured product. Dexter, MI (PRWEB) February 18, 2014 Protomatic has expanded capacity since being identified by the State of Michigan Innostate Program as one of 30 companies positioned to help entrepreneurs take product concepts into prototypes and low-volume manufacturing. To help these companies turn their ideas into reality, Protomatic...

2014-02-18 23:24:07

Elasto Proxy, supplier of specialty seals and custom insulation, announces case study about how 3D printing supports mold making, prototyping, and low-volume production of rubber auto parts. Custom fabricator used 3D printed part to make molds and provide prototypes to U.S.-based maker of electric cars. Boisbriand, Quebec, Canada (PRWEB) February 18, 2014 Electric vehicles aren’t just for city streets and highways. Smaller, golf cart-like models are used in gated communities for short...


Word of the Day
call-note
  • The call or cry of a bird or other animal to its mate or its young.
'Call-note' is newer than 'bird-call,' which originally referred to 'an instrument for imitating the note of birds' but now also refers to 'the song or cry of a bird.'
Related